Niz | Puni Prikaz

garginis · 22.10.2012. 12.59

Posto ati drajveri za graficke <HD5000 nisu kompitabilni sa 12.10, morao sam da instaliram legacy drajvere.To je sve ok, rade drajveri ali ne mogu da nadjem temperaturu graficke.

Probao sam preko sensors-detect, hwmon-a ali nista ne pomaze.Jedino sam uspeo preko neke GUI aplikacije da nadjem temperaturu ali meni treba nacin da nadjem temperaturu u terminalu da bih mogao da je iskoristim za conky.Da li neko zna nacin kako ovo da uradim?

Pozdrav, Dragan

~~hightech~~ · 22.10.2012. 13.07

Kod:

${color #17f118}CPU ${color orangered} ${hr 1}

${color #00B5FF}

Frekvencija CPU: ${freq}MHz

Load-average: ${loadavg}

Temperatura: ${acpitemp}

CPU1: ${cpu cpu0}%  CPU2: ${cpu cpu1}%

${cpubar cpu0}

${cpubar cpu1}

${cpugraph 000000 ffffff}

eto ti moje parce konkija Smile

profiler1982 · 22.10.2012. 13.08

jesi li instalirao lm sensors
evo za 12.10

garginis · 22.10.2012. 13.38

Evo i mog, to je radilo sa onim default drajverima koji dolaze uz 12.10, ali sa legacy drajverima ne radi.

Kod:

${voffset 17}GPU Temp:${goto 127}${font DroidSans:size=8.3}${execi 8 sensors | grep "temp1" |cut -c16-17| head -2 | tail -1}°C${goto 221}94°C%${font}

Imam vec lm-sensors.Uradio sam sensors-detect posle instalacije legacy drajvera ali nije naslo gpu.
Evo sta mi ispisuje:

Kod:

coretemp-isa-0000

Adapter: ISA adapter

Core 0:       +37.0°C  (high = +76.0°C, crit = +100.0°C)

Core 1:       +37.0°C  (high = +76.0°C, crit = +100.0°C)

it8718-isa-0290

Adapter: ISA adapter

in0:          +1.30 V  (min =  +0.00 V, max =  +4.08 V)

in1:          +2.10 V  (min =  +0.00 V, max =  +4.08 V)

in2:          +3.34 V  (min =  +0.00 V, max =  +4.08 V)

+5V:          +2.88 V  (min =  +0.00 V, max =  +4.08 V)

in4:          +0.24 V  (min =  +0.00 V, max =  +2.10 V)

in5:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM

in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM

in7:          +3.15 V  (min =  +0.00 V, max =  +4.08 V)

Vbat:         +3.26 V  

fan1:        2385 RPM  (min =    0 RPM)

fan2:           0 RPM  (min =    0 RPM)

fan3:           0 RPM  (min =    0 RPM)

temp1:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor

temp2:         -2.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor

temp3:        +23.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode

cpu0_vid:    +1.150 V

intrusion0:  ALARM

~~hightech~~ · 22.10.2012. 13.39

Kod:

Temperatura: ${acpitemp}

pa eto ti conky linija bas za temeraturu Smile

garginis · 22.10.2012. 13.43

Ne radi taj kod, vraca vrednost 0.

~~hightech~~ · 22.10.2012. 13.51

Uf, meni radi, ne znam, mozda od paketa nesto nemas, probaj taj lm-sensors da ubacis . tj izvrsis u konkiju Smile

garginis · 22.10.2012. 13.54

Radilo je i meni u lm-sensors pre instalacije legacy drivera.Ovaj kod sam koristio

Kod:

${execi 8 sensors | grep "temp1" |cut -c16-17| head -2 | tail -1}

Sada mi ne radi vise.Nije mi problem toliko conky, bitno je da samo nadjem ispis temperature u terminalu.Laku cu posle to ubaciti u conky.

~~hightech~~ · 22.10.2012. 13.59

Kod:

sudo aptitude install acpi

Koristis je:

Kod:

acpi -t

i za conky gore imas Smile

al evo reda:

Kod:

Temperatura: ${acpitemp}

garginis · 22.10.2012. 14.15

Kada ukucam acpi -t u teminalu mi kaze

Kod:

No support for device type: ac_adapter

No support for device type: thermal_zone

No support for device type: fan

A u konkiju opet dobijam 0.

~~hightech~~ · 22.10.2012. 14.22

Pa jesi li instalirao paket acpi?

garginis · 22.10.2012. 14.48

Kod:

acpi --version

acpi 1.6

Copyright (C) 2001 Grahame Bowland.

              2008-2012 Michael Meskes.

This is free software; see the source for copying conditions.  There is NO

warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Izgleda da je instaliran.

~~hightech~~ · 22.10.2012. 15.14

aj:

Kod:

acpi --help

pa vidi sta ti izlistava(imas dodatke sto za temp sto za ostalo -t, -tf, ...), mozda imas neku noviju verziju acpija,

garginis · 22.10.2012. 15.36

Kod:

$ acpi --help

Usage: acpi [OPTION]...

Shows information from the /proc filesystem, such as battery status or

thermal information.

  -b, --battery            battery information

  -i, --details            show additional details if available:

                             - battery capacity information

                             - temperature trip points

  -a, --ac-adapter         ac adapter information

  -t, --thermal            thermal information

  -c, --cooling            cooling information

  -V, --everything         show every device, overrides above options

  -s, --show-empty         show non-operational devices

  -f, --fahrenheit         use fahrenheit as the temperature unit

  -k, --kelvin             use kelvin as the temperature unit

  -d, --directory <dir>    path to ACPI info (/sys/class resp. /proc/acpi)

  -p, --proc               use old proc interface instead of new sys interface

  -h, --help               display this help and exit

  -v, --version            output version information and exit

evo sta se desava kad kucam acpi --everything

Kod:

$ acpi --everything

No support for device type: power_supply

No support for device type: power_supply

Cooling 0: Processor 0 of 10

Cooling 1: Processor 0 of 10

sambucuself · 30.12.2012. 09.10

Evo komande iz samog drajvera koja to radi:

Kod:

aticonfig --od-gettemperature

Pravilnik Forum-a

Ja sam imao HD 4850 i tu komandu sam koristio. Ne znam tacno kako je najbolje uklopiti je u conky

garginis · 04.01.2013. 00.29

Hvala druze, radi ta komanda.

Kod:

aticonfig --od-gettemperature| cut -c 43-44| tail -1

Sada je samo problem kako namestiti grafik u conkyju jer ne rade one conky varijable sa legacy drajverom.

Niz \| Puni Prikaz GPU Temp
Autor	Poruka