Niz | Puni Prikaz

klmd · 03.11.2012. 10.19

У последње време систем је почео да ми пријављује неку унутрашњу грешку. Не знам о чему је реч. Избаци ми да пријавим проблем што и урадим, али кад то урадим он мени опет приказује исту поруку. Закључио сам да има неке везе са интелом, интел хд 2000. Ево једна слика да видите како то изгледа
http://imageshack.us/photo/my-images/803...00901.png/
http://img803.imageshack.us/img803/8696/...100901.png
Korisno...(click)
Немам проблема у раду систем. Неки пут ми се десило да док играм Сим сити преко вајна систем закочи па морам да га рестартујем, али то се ретко дешава.
Поздрав
Систем Убунту 12.10 64бит. 4гб, интел кор и3...

**Kostić** · 03.11.2012. 10.25

И мени се дешавало често. Знам да је једно ажурирање било решило проблем али је онда друго поново изазвало проблеме са Интелом. Има доста проблема са Интеловим управљачима и Јунитијем.

Могао би да пробаш Л-Икс-ДЕ окружење (енгл. LXDE). Ја сам прешао на њега, мање једе РАМ меморије и немам таквих проблема више. Такође, уради sudo apt-get update; sudo apt-get upgrade ако већ ниси то урадио.

Промена: Кажеш да ти систем ради уредно. Ако ти се не дешавају замрзавања, могао би онда да искључиш апорт програм за пријављивање грешака да те не нервира. Smile

**combuster** · 03.11.2012. 10.26

Kada ti se to desi proveri /var/log/Xorg.0.log i izlaz od dmesg komande, ne znam da li ubuntu po default-u ima omogucen debugfs ali u tom slucaju i /sys/kernel/debug/dri/0/i915_error_state bi mogao da ima neke relevantne informacije.

Mozes i da okacis ove fajlove kao attachment uz poruku pa da pogledamo i mi.

klmd · 03.11.2012. 11.31

Ево шта каже Xorg.0.log

Kod:

[    19.130] 

X.Org X Server 1.13.0

Release Date: 2012-09-05

[    19.130] X Protocol Version 11, Revision 0

[    19.130] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu

[    19.130] Current Operating System: Linux stojakov-Inspiron-N5050 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64

[    19.130] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=27e7471a-d17d-4b33-87e4-98eaca61f195 ro quiet splash vt.handoff=7

[    19.130] Build Date: 08 October 2012  03:34:01PM

[    19.130] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 

[    19.130] Current version of pixman: 0.26.0

[    19.130]     Before reporting problems, check http://wiki.x.org

    to make sure that you have the latest version.

[    19.130] Markers: (--) probed, (**) from config file, (==) default setting,

    (++) from command line, (!!) notice, (II) informational,

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    19.130] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 08:17:13 2012

[    19.176] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    19.176] (==) No Layout section.  Using the first Screen section.

[    19.176] (==) No screen section available. Using defaults.

[    19.177] (**) |-->Screen "Default Screen Section" (0)

[    19.177] (**) |   |-->Monitor "<default monitor>"

[    19.177] (==) No monitor specified for screen "Default Screen Section".

    Using a default monitor configuration.

[    19.177] (==) Automatically adding devices

[    19.177] (==) Automatically enabling devices

[    19.177] (==) Automatically adding GPU devices

[    19.177] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.

[    19.177]     Entry deleted from font path.

[    19.177] (==) FontPath set to:

    /usr/share/fonts/X11/misc,

    /usr/share/fonts/X11/Type1,

    built-ins

[    19.177] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"

[    19.177] (II) The server relies on udev to provide the list of input devices.

    If no devices become available, reconfigure udev or disable AutoAddDevices.

[    19.177] (II) Loader magic: 0x7f9746a55c40

[    19.177] (II) Module ABI versions:

[    19.177]     X.Org ANSI C Emulation: 0.4

[    19.177]     X.Org Video Driver: 13.0

[    19.177]     X.Org XInput driver : 18.0

[    19.177]     X.Org Server Extension : 7.0

[    19.177] (II) config/udev: Adding drm device (/dev/dri/card0)

[    19.178] (--) PCI:*(0:0:2:0) 8086:0116:1028:0504 rev 9, Mem @ 0xf6800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64

[    19.178] (II) Open ACPI successful (/var/run/acpid.socket)

[    19.178] Initializing built-in extension Generic Event Extension

[    19.178] Initializing built-in extension SHAPE

[    19.178] Initializing built-in extension MIT-SHM

[    19.178] Initializing built-in extension XInputExtension

[    19.178] Initializing built-in extension XTEST

[    19.178] Initializing built-in extension BIG-REQUESTS

[    19.178] Initializing built-in extension SYNC

[    19.178] Initializing built-in extension XKEYBOARD

[    19.178] Initializing built-in extension XC-MISC

[    19.178] Initializing built-in extension SECURITY

[    19.178] Initializing built-in extension XINERAMA

[    19.178] Initializing built-in extension XFIXES

[    19.178] Initializing built-in extension RENDER

[    19.178] Initializing built-in extension RANDR

[    19.178] Initializing built-in extension COMPOSITE

[    19.178] Initializing built-in extension DAMAGE

[    19.178] Initializing built-in extension MIT-SCREEN-SAVER

[    19.178] Initializing built-in extension DOUBLE-BUFFER

[    19.178] Initializing built-in extension RECORD

[    19.178] Initializing built-in extension DPMS

[    19.178] Initializing built-in extension X-Resource

[    19.178] Initializing built-in extension XVideo

[    19.178] Initializing built-in extension XVideo-MotionCompensation

[    19.178] Initializing built-in extension XFree86-VidModeExtension

[    19.178] Initializing built-in extension XFree86-DGA

[    19.178] Initializing built-in extension XFree86-DRI

[    19.178] Initializing built-in extension DRI2

[    19.178] (II) LoadModule: "glx"

[    19.257] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    19.257] (II) Module glx: vendor="X.Org Foundation"

[    19.257]     compiled for 1.13.0, module version = 1.0.0

[    19.257]     ABI class: X.Org Server Extension, version 7.0

[    19.257] (==) AIGLX enabled

[    19.257] Loading extension GLX

[    19.257] (==) Matched intel as autoconfigured driver 0

[    19.257] (==) Matched intel as autoconfigured driver 1

[    19.257] (==) Matched vesa as autoconfigured driver 2

[    19.257] (==) Matched modesetting as autoconfigured driver 3

[    19.257] (==) Matched fbdev as autoconfigured driver 4

[    19.257] (==) Assigned the driver to the xf86ConfigLayout

[    19.257] (II) LoadModule: "intel"

[    19.257] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[    19.257] (II) Module intel: vendor="X.Org Foundation"

[    19.257]     compiled for 1.13.0, module version = 2.20.9

[    19.257]     Module class: X.Org Video Driver

[    19.257]     ABI class: X.Org Video Driver, version 13.0

[    19.257] (II) LoadModule: "vesa"

[    19.257] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    19.257] (II) Module vesa: vendor="X.Org Foundation"

[    19.257]     compiled for 1.12.99.902, module version = 2.3.2

[    19.257]     Module class: X.Org Video Driver

[    19.257]     ABI class: X.Org Video Driver, version 13.0

[    19.257] (II) LoadModule: "modesetting"

[    19.258] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    19.258] (II) Module modesetting: vendor="X.Org Foundation"

[    19.258]     compiled for 1.13.0, module version = 0.5.0

[    19.258]     Module class: X.Org Video Driver

[    19.258]     ABI class: X.Org Video Driver, version 13.0

[    19.258] (II) LoadModule: "fbdev"

[    19.258] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    19.258] (II) Module fbdev: vendor="X.Org Foundation"

[    19.258]     compiled for 1.12.99.902, module version = 0.4.3

[    19.258]     Module class: X.Org Video Driver

[    19.258]     ABI class: X.Org Video Driver, version 13.0

[    19.258] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,

    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,

    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,

    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,

    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,

    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),

    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),

    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),

    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),

    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,

    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),

    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),

    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),

    Haswell Server (GT2+), Haswell SDV Desktop (GT1),

    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),

    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),

    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),

    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),

    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),

    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),

    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),

    Haswell ULT Server (GT1), Haswell ULT Server (GT2),

    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),

    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),

    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),

    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),

    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),

    ValleyView PO board

[    19.258] (II) VESA: driver for VESA chipsets: vesa

[    19.258] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    19.258] (II) FBDEV: driver for framebuffer: fbdev

[    19.258] (++) using VT number 7

[    19.258] (II) intel(0): using device path '/dev/dri/card0'

[    19.258] (WW) Falling back to old probe method for vesa

[    19.258] (WW) Falling back to old probe method for modesetting

[    19.258] (WW) Falling back to old probe method for fbdev

[    19.258] (II) Loading sub module "fbdevhw"

[    19.258] (II) LoadModule: "fbdevhw"

[    19.259] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    19.259] (II) Module fbdevhw: vendor="X.Org Foundation"

[    19.259]     compiled for 1.13.0, module version = 0.0.2

[    19.259]     ABI class: X.Org Video Driver, version 13.0

[    19.259] (II) intel(0): Creating default Display subsection in Screen section

    "Default Screen Section" for depth/fbbpp 24/32

[    19.259] (==) intel(0): Depth 24, (--) framebuffer bpp 32

[    19.259] (==) intel(0): RGB weight 888

[    19.259] (==) intel(0): Default visual is TrueColor

[    19.259] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)

[    19.259] (**) intel(0): Relaxed fencing enabled

[    19.259] (**) intel(0): Wait on SwapBuffers? enabled

[    19.259] (**) intel(0): Triple buffering? enabled

[    19.259] (**) intel(0): Framebuffer tiled

[    19.259] (**) intel(0): Pixmaps tiled

[    19.259] (**) intel(0): 3D buffers tiled

[    19.259] (**) intel(0): SwapBuffers wait enabled

[    19.259] (==) intel(0): video overlay key set to 0x101fe

[    19.259] (II) intel(0): Output LVDS1 has no monitor section

[    19.259] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0

[    19.259] (II) intel(0): Output VGA1 has no monitor section

[    19.260] (II) intel(0): Output HDMI1 has no monitor section

[    19.308] (II) intel(0): Output DP1 has no monitor section

[    19.308] (II) intel(0): EDID for output LVDS1

[    19.308] (II) intel(0): Manufacturer: CMO  Model: 15a4  Serial#: 0

[    19.308] (II) intel(0): Year: 2010  Week: 27

[    19.308] (II) intel(0): EDID Version: 1.3

[    19.308] (II) intel(0): Digital Display Input

[    19.308] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19

[    19.308] (II) intel(0): Gamma: 2.20

[    19.308] (II) intel(0): No DPMS capabilities specified

[    19.308] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 

[    19.308] (II) intel(0): First detailed timing is preferred mode

[    19.308] (II) intel(0): redX: 0.617 redY: 0.340   greenX: 0.320 greenY: 0.598

[    19.308] (II) intel(0): blueX: 0.160 blueY: 0.084   whiteX: 0.313 whiteY: 0.329

[    19.308] (II) intel(0): Manufacturer's mask: 0

[    19.308] (II) intel(0): Supported detailed timing:

[    19.308] (II) intel(0): clock: 76.8 MHz   Image Size:  344 x 194 mm

[    19.308] (II) intel(0): h_active: 1366  h_sync: 1392  h_sync_end 1448 h_blank_end 1580 h_border: 0

[    19.308] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 785 v_blanking: 810 v_border: 0

[    19.308] (II) intel(0): Supported detailed timing:

[    19.308] (II) intel(0): clock: 76.8 MHz   Image Size:  344 x 194 mm

[    19.308] (II) intel(0): h_active: 1366  h_sync: 1392  h_sync_end 1448 h_blank_end 1580 h_border: 0

[    19.308] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 785 v_blanking: 810 v_border: 0

[    19.308] (II) intel(0):  XM5XGN156B6

[    19.308] (II) intel(0): Unknown vendor-specific block 0

[    19.308] (II) intel(0): EDID (in hex):

[    19.308] (II) intel(0):     00ffffffffffff000dafa41500000000

[    19.308] (II) intel(0):     1b140103902213780a00259e57529929

[    19.308] (II) intel(0):     15505400000001010101010101010101

[    19.308] (II) intel(0):     010101010101001e56d650002a301a38

[    19.308] (II) intel(0):     4d0058c21000001a001e56d650002a30

[    19.308] (II) intel(0):     1a384d0058c21000001a000000fe0058

[    19.308] (II) intel(0):     4d355847024e31353642360a00000000

[    19.308] (II) intel(0):     00000000000000000001010a20200041

[    19.308] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)

[    19.308] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)

[    19.308] (II) intel(0): Printing probed modes for output LVDS1

[    19.308] (II) intel(0): Modeline "1366x768"x60.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[    19.308] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[    19.308] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[    19.308] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[    19.308] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[    19.308] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[    19.308] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    19.308] (II) intel(0): EDID for output VGA1

[    19.309] (II) intel(0): EDID for output HDMI1

[    19.364] (II) intel(0): EDID for output DP1

[    19.364] (II) intel(0): Output LVDS1 connected

[    19.364] (II) intel(0): Output VGA1 disconnected

[    19.364] (II) intel(0): Output HDMI1 disconnected

[    19.364] (II) intel(0): Output DP1 disconnected

[    19.364] (II) intel(0): Using exact sizes for initial modes

[    19.364] (II) intel(0): Output LVDS1 using initial mode 1366x768

[    19.364] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[    19.364] (II) intel(0): Kernel page flipping support detected, enabling

[    19.364] (==) intel(0): DPI set to (96, 96)

[    19.364] (II) Loading sub module "fb"

[    19.364] (II) LoadModule: "fb"

[    19.364] (II) Loading /usr/lib/xorg/modules/libfb.so

[    19.364] (II) Module fb: vendor="X.Org Foundation"

[    19.364]     compiled for 1.13.0, module version = 1.0.0

[    19.364]     ABI class: X.Org ANSI C Emulation, version 0.4

[    19.364] (II) Loading sub module "dri2"

[    19.364] (II) LoadModule: "dri2"

[    19.364] (II) Module "dri2" already built-in

[    19.364] (II) UnloadModule: "vesa"

[    19.364] (II) Unloading vesa

[    19.364] (II) UnloadModule: "modesetting"

[    19.364] (II) Unloading modesetting

[    19.364] (II) UnloadModule: "fbdev"

[    19.364] (II) Unloading fbdev

[    19.364] (II) UnloadSubModule: "fbdevhw"

[    19.364] (II) Unloading fbdevhw

[    19.364] (==) Depth 24 pixmap format is 32 bpp

[    19.364] (II) intel(0): [DRI2] Setup complete

[    19.364] (II) intel(0): [DRI2]   DRI driver: i965

[    19.364] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled

[    19.365] (II) UXA(0): Driver registered support for the following operations:

[    19.365] (II)         solid

[    19.365] (II)         copy

[    19.365] (II)         composite (RENDER acceleration)

[    19.365] (II)         put_image

[    19.365] (II)         get_image

[    19.365] (==) intel(0): Backing store disabled

[    19.365] (==) intel(0): Silken mouse enabled

[    19.365] (II) intel(0): Initializing HW Cursor

[    19.365] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    19.366] (==) intel(0): DPMS enabled

[    19.366] (==) intel(0): Intel XvMC decoder enabled

[    19.366] (II) intel(0): Set up textured video

[    19.366] (II) intel(0): [XvMC] xvmc_vld driver initialized.

[    19.366] (II) intel(0): direct rendering: DRI2 Enabled

[    19.366] (==) intel(0): hotplug detection: "enabled"

[    19.384] (--) RandR disabled

[    19.391] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    19.391] (II) AIGLX: enabled GLX_INTEL_swap_event

[    19.391] (II) AIGLX: enabled GLX_ARB_create_context

[    19.391] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    19.391] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile

[    19.391] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[    19.391] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    19.391] (II) AIGLX: Loaded and initialized i965

[    19.391] (II) GLX: Initialized DRI2 GL provider for screen 0

[    19.391] (II) intel(0): Setting screen physical size to 361 x 203

[    19.398] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm

[    19.399] (II) config/udev: Adding input device Power Button (/dev/input/event3)

[    19.399] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    19.399] (II) LoadModule: "evdev"

[    19.400] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    19.400] (II) Module evdev: vendor="X.Org Foundation"

[    19.400]     compiled for 1.13.0, module version = 2.7.3

[    19.400]     Module class: X.Org XInput Driver

[    19.400]     ABI class: X.Org XInput driver, version 18.0

[    19.400] (II) Using input driver 'evdev' for 'Power Button'

[    19.400] (**) Power Button: always reports core events

[    19.400] (**) evdev: Power Button: Device: "/dev/input/event3"

[    19.400] (--) evdev: Power Button: Vendor 0 Product 0x1

[    19.400] (--) evdev: Power Button: Found keys

[    19.400] (II) evdev: Power Button: Configuring as keyboard

[    19.400] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"

[    19.400] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    19.400] (**) Option "xkb_rules" "evdev"

[    19.400] (**) Option "xkb_model" "pc105"

[    19.400] (**) Option "xkb_layout" "rs,rs"

[    19.400] (**) Option "xkb_variant" "latin,basic"

[    19.401] (II) XKB: reuse xkmfile /var/lib/xkb/server-D3B3BF5A9B672DE87DEB500C713A86FAB72A52F1.xkm

[    19.402] (II) config/udev: Adding input device Video Bus (/dev/input/event8)

[    19.402] (**) Video Bus: Applying InputClass "evdev keyboard catchall"

[    19.402] (II) Using input driver 'evdev' for 'Video Bus'

[    19.402] (**) Video Bus: always reports core events

[    19.402] (**) evdev: Video Bus: Device: "/dev/input/event8"

[    19.402] (--) evdev: Video Bus: Vendor 0 Product 0x6

[    19.402] (--) evdev: Video Bus: Found keys

[    19.402] (II) evdev: Video Bus: Configuring as keyboard

[    19.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"

[    19.402] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    19.402] (**) Option "xkb_rules" "evdev"

[    19.402] (**) Option "xkb_model" "pc105"

[    19.402] (**) Option "xkb_layout" "rs,rs"

[    19.402] (**) Option "xkb_variant" "latin,basic"

[    19.402] (II) config/udev: Adding input device Power Button (/dev/input/event1)

[    19.403] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    19.403] (II) Using input driver 'evdev' for 'Power Button'

[    19.403] (**) Power Button: always reports core events

[    19.403] (**) evdev: Power Button: Device: "/dev/input/event1"

[    19.403] (--) evdev: Power Button: Vendor 0 Product 0x1

[    19.403] (--) evdev: Power Button: Found keys

[    19.403] (II) evdev: Power Button: Configuring as keyboard

[    19.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"

[    19.403] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)

[    19.403] (**) Option "xkb_rules" "evdev"

[    19.403] (**) Option "xkb_model" "pc105"

[    19.403] (**) Option "xkb_layout" "rs,rs"

[    19.403] (**) Option "xkb_variant" "latin,basic"

[    19.403] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)

[    19.403] (II) No input driver specified, ignoring this device.

[    19.403] (II) This device may have been added with another device file.

[    19.403] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)

[    19.403] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[    19.403] (II) Using input driver 'evdev' for 'Sleep Button'

[    19.403] (**) Sleep Button: always reports core events

[    19.403] (**) evdev: Sleep Button: Device: "/dev/input/event2"

[    19.403] (--) evdev: Sleep Button: Vendor 0 Product 0x3

[    19.403] (--) evdev: Sleep Button: Found keys

[    19.403] (II) evdev: Sleep Button: Configuring as keyboard

[    19.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"

[    19.403] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)

[    19.403] (**) Option "xkb_rules" "evdev"

[    19.403] (**) Option "xkb_model" "pc105"

[    19.403] (**) Option "xkb_layout" "rs,rs"

[    19.403] (**) Option "xkb_variant" "latin,basic"

[    19.404] (II) config/udev: Adding drm device (/dev/dri/card0)

[    19.404] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event5)

[    19.404] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"

[    19.404] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'

[    19.404] (**) PIXART USB OPTICAL MOUSE: always reports core events

[    19.404] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event5"

[    19.404] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510

[    19.404] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons

[    19.404] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)

[    19.404] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes

[    19.404] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes

[    19.404] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse

[    19.404] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support

[    19.404] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5

[    19.404] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    19.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event5"

[    19.404] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 10)

[    19.404] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.

[    19.404] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1

[    19.404] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0

[    19.404] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000

[    19.404] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4

[    19.404] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)

[    19.404] (II) No input driver specified, ignoring this device.

[    19.404] (II) This device may have been added with another device file.

[    19.405] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event6)

[    19.405] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"

[    19.405] (II) Using input driver 'evdev' for 'Integrated Webcam'

[    19.405] (**) Integrated Webcam: always reports core events

[    19.405] (**) evdev: Integrated Webcam: Device: "/dev/input/event6"

[    19.405] (--) evdev: Integrated Webcam: Vendor 0xbda Product 0x58c0

[    19.405] (--) evdev: Integrated Webcam: Found keys

[    19.405] (II) evdev: Integrated Webcam: Configuring as keyboard

[    19.405] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6/event6"

[    19.405] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 11)

[    19.405] (**) Option "xkb_rules" "evdev"

[    19.405] (**) Option "xkb_model" "pc105"

[    19.405] (**) Option "xkb_layout" "rs,rs"

[    19.405] (**) Option "xkb_variant" "latin,basic"

[    19.405] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)

[    19.405] (II) No input driver specified, ignoring this device.

[    19.405] (II) This device may have been added with another device file.

[    19.405] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)

[    19.405] (II) No input driver specified, ignoring this device.

[    19.405] (II) This device may have been added with another device file.

[    19.406] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)

[    19.406] (II) No input driver specified, ignoring this device.

[    19.406] (II) This device may have been added with another device file.

[    19.406] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)

[    19.406] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[    19.406] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[    19.406] (**) AT Translated Set 2 keyboard: always reports core events

[    19.406] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"

[    19.406] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[    19.406] (--) evdev: AT Translated Set 2 keyboard: Found keys

[    19.406] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[    19.406] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"

[    19.406] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)

[    19.406] (**) Option "xkb_rules" "evdev"

[    19.406] (**) Option "xkb_model" "pc105"

[    19.406] (**) Option "xkb_layout" "rs,rs"

[    19.406] (**) Option "xkb_variant" "latin,basic"

[    19.406] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)

[    19.406] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"

[    19.406] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"

[    19.406] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"

[    19.406] (II) LoadModule: "synaptics"

[    19.406] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so

[    19.407] (II) Module synaptics: vendor="X.Org Foundation"

[    19.407]     compiled for 1.12.99.905, module version = 1.6.2

[    19.407]     Module class: X.Org XInput Driver

[    19.407]     ABI class: X.Org XInput driver, version 18.0

[    19.407] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'

[    19.407] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events

[    19.407] (**) Option "Device" "/dev/input/event10"

[    19.428] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127

[    19.428] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15

[    19.428] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found

[    19.428] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events

[    19.428] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"

[    19.428] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 13)

[    19.428] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5

[    19.428] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75

[    19.428] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082

[    19.429] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1

[    19.429] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1

[    19.429] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000

[    19.429] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4

[    19.429] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found

[    19.429] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)

[    19.429] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"

[    19.429] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)

[    19.429] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"

[    19.429] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"

[    19.429] (II) Using input driver 'evdev' for 'DualPoint Stick'

[    19.429] (**) DualPoint Stick: always reports core events

[    19.429] (**) evdev: DualPoint Stick: Device: "/dev/input/event9"

[    19.429] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8

[    19.429] (--) evdev: DualPoint Stick: Found 3 mouse buttons

[    19.429] (--) evdev: DualPoint Stick: Found relative axes

[    19.429] (--) evdev: DualPoint Stick: Found x and y relative axes

[    19.429] (II) evdev: DualPoint Stick: Configuring as mouse

[    19.429] (**) Option "Emulate3Buttons" "true"

[    19.429] (**) Option "EmulateWheel" "true"

[    19.429] (**) Option "EmulateWheelButton" "2"

[    19.429] (**) Option "YAxisMapping" "4 5"

[    19.429] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5

[    19.429] (**) Option "XAxisMapping" "6 7"

[    19.429] (**) evdev: DualPoint Stick: XAxisMapping: buttons 6 and 7

[    19.429] (**) evdev: DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    19.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"

[    19.429] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 14)

[    19.429] (II) evdev: DualPoint Stick: initialized for relative axes.

[    19.429] (**) DualPoint Stick: (accel) keeping acceleration scheme 1

[    19.429] (**) DualPoint Stick: (accel) acceleration profile 0

[    19.429] (**) DualPoint Stick: (accel) acceleration factor: 2.000

[    19.429] (**) DualPoint Stick: (accel) acceleration threshold: 4

[    19.430] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)

[    19.430] (II) No input driver specified, ignoring this device.

[    19.430] (II) This device may have been added with another device file.

[    19.431] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)

[    19.431] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"

[    19.431] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'

[    19.431] (**) Dell WMI hotkeys: always reports core events

[    19.431] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"

[    19.431] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0

[    19.431] (--) evdev: Dell WMI hotkeys: Found keys

[    19.431] (II) evdev: Dell WMI hotkeys: Configuring as keyboard

[    19.431] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"

[    19.431] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)

[    19.431] (**) Option "xkb_rules" "evdev"

[    19.431] (**) Option "xkb_model" "pc105"

[    19.431] (**) Option "xkb_layout" "rs,rs"

[    19.431] (**) Option "xkb_variant" "latin,basic"

[    20.382] (II) intel(0): EDID vendor "CMO", prod id 5540

[    20.382] (II) intel(0): Printing DDC gathered Modelines:

[    20.382] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[    20.829] (II) intel(0): EDID vendor "CMO", prod id 5540

[    20.829] (II) intel(0): Printing DDC gathered Modelines:

[    20.830] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[    20.956] (II) intel(0): EDID vendor "CMO", prod id 5540

[    20.956] (II) intel(0): Printing DDC gathered Modelines:

[    20.956] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[    21.055] (II) intel(0): EDID vendor "CMO", prod id 5540

[    21.055] (II) intel(0): Printing DDC gathered Modelines:

[    21.055] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[    25.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-A763B205C8CEB18B818AC1B9202655BCBEDA891A.xkm

[    25.651] (II) intel(0): EDID vendor "CMO", prod id 5540

[    25.651] (II) intel(0): Printing DDC gathered Modelines:

[    25.651] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  2737.794] (II) PM Event received: Capability Changed

[  2737.794] I830PMEvent: Capability change

[  2737.820] (II) intel(0): EDID vendor "CMO", prod id 5540

[  2737.820] (II) intel(0): Printing DDC gathered Modelines:

[  2737.820] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  2740.386] (II) AIGLX: Suspending AIGLX clients for VT switch

[  2744.901] (II) Open ACPI successful (/var/run/acpid.socket)

[  2744.901] (II) AIGLX: Resuming AIGLX clients after VT switch

[  2744.916] (II) intel(0): EDID vendor "CMO", prod id 5540

[  2744.916] (II) intel(0): Printing DDC gathered Modelines:

[  2744.916] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  2744.983] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found

[  2745.272] (II) intel(0): EDID vendor "CMO", prod id 5540

[  2745.272] (II) intel(0): Printing DDC gathered Modelines:

[  2745.272] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  2894.918] (II) intel(0): EDID vendor "CMO", prod id 5540

[  2894.918] (II) intel(0): Printing DDC gathered Modelines:

[  2894.918] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  3079.891] (II) intel(0): EDID vendor "CMO", prod id 5540

[  3079.891] (II) intel(0): Printing DDC gathered Modelines:

[  3079.891] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  4370.034] (II) PM Event received: Capability Changed

[  4370.034] I830PMEvent: Capability change

[  4370.045] (II) intel(0): EDID vendor "CMO", prod id 5540

[  4370.045] (II) intel(0): Printing DDC gathered Modelines:

[  4370.045] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  4372.161] (II) AIGLX: Suspending AIGLX clients for VT switch

[  4376.280] (II) Open ACPI successful (/var/run/acpid.socket)

[  4376.280] (II) AIGLX: Resuming AIGLX clients after VT switch

[  4376.304] (II) intel(0): EDID vendor "CMO", prod id 5540

[  4376.304] (II) intel(0): Printing DDC gathered Modelines:

[  4376.304] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

[  4376.370] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found

[  4376.765] (II) intel(0): EDID vendor "CMO", prod id 5540

[  4376.765] (II) intel(0): Printing DDC gathered Modelines:

[  4376.765] (II) intel(0): Modeline "1366x768"x0.0   76.80  1366 1392 1448 1580  768 772 785 810 +hsync -vsync (48.6 kHz eP)

Ево и dmesg

Kod:

[ 2735.212542] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 2735.212546] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 2735.212550] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 2736.723385] PM: Syncing filesystems ... done.

[ 2736.728122] PM: Preparing system for mem sleep

[ 2736.879587] Freezing user space processes ... (elapsed 0.01 seconds) done.

[ 2736.895530] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 2736.911492] PM: Entering mem sleep

[ 2736.911625] Suspending console(s) (use no_console_suspend to debug)

[ 2736.912004] sd 0:0:0:0: >[sda] Synchronizing SCSI cache

[ 2736.922212] pciehp 0000:00:1c.7:pcie04: >pciehp_suspend ENTRY

[ 2737.002392] sd 0:0:0:0: >[sda] Stopping disk

[ 2737.143028] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 221.114 msecs

[ 2737.620817] PM: suspend of drv:sd dev:0:0:0:0 complete after 709.862 msecs

[ 2737.620888] PM: suspend of drv:scsi dev:target0:0:0 complete after 709.904 msecs

[ 2737.620900] PM: suspend of drv:scsi dev:host0 complete after 699.883 msecs

[ 2737.634427] PM: suspend of drv: dev:ata1 complete after 713.329 msecs

[ 2737.650283] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 729.185 msecs

[ 2737.650357] PM: suspend of drv: dev:pci0000:00 complete after 729.053 msecs

[ 2737.650366] PM: suspend of devices complete after 739.737 msecs

[ 2737.650369] PM: suspend devices took 0.740 seconds

[ 2737.650494] PM: late suspend of devices complete after 0.123 msecs

[ 2737.666374] r8169 0000:05:00.0: >wake-up capability enabled by ACPI

[ 2737.686549] ehci_hcd 0000:00:1d.0: >wake-up capability enabled by ACPI

[ 2737.705635] ehci_hcd 0000:00:1a.0: >wake-up capability enabled by ACPI

[ 2737.734243] PM: noirq suspend of devices complete after 83.868 msecs

[ 2737.734466] ACPI: Preparing to enter system sleep state S3

[ 2737.742651] PM: Saving platform NVS memory

[ 2737.752136] Disabling non-boot CPUs ...

[ 2737.853974] CPU 1 is now offline

[ 2737.957803] CPU 2 is now offline

[ 2737.958458] Broke affinity for irq 16

[ 2737.958466] Broke affinity for irq 19

[ 2737.958474] Broke affinity for irq 23

[ 2737.958476] Broke affinity for irq 41

[ 2738.061644] CPU 3 is now offline

[ 2738.062021] Extended CMOS year: 2000

[ 2738.063042] ACPI: Low-level resume complete

[ 2738.063082] PM: Restoring platform NVS memory

[ 2738.063997] Extended CMOS year: 2000

[ 2738.064033] Enabling non-boot CPUs ...

[ 2738.064131] Booting Node 0 Processor 1 APIC 0x2

[ 2738.077608] CPU1 is up

[ 2738.077665] Booting Node 0 Processor 2 APIC 0x1

[ 2738.091142] CPU2 is up

[ 2738.091215] Booting Node 0 Processor 3 APIC 0x3

[ 2738.104803] CPU3 is up

[ 2738.108919] ACPI: Waking up from system sleep state S3

[ 2738.130070] ehci_hcd 0000:00:1a.0: >wake-up capability disabled by ACPI

[ 2738.133097] ehci_hcd 0000:00:1d.0: >wake-up capability disabled by ACPI

[ 2738.133475] PM: noirq resume of devices complete after 5.835 msecs

[ 2738.133545] PM: early resume of devices complete after 0.047 msecs

[ 2738.133586] i915 0000:00:02.0: >setting latency timer to 64

[ 2738.133601] ehci_hcd 0000:00:1a.0: >setting latency timer to 64

[ 2738.133644] mei 0000:00:16.0: >irq 44 for MSI/MSI-X

[ 2738.133667] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X

[ 2738.134880] pciehp 0000:00:1c.7:pcie04: >pciehp_resume ENTRY

[ 2738.134944] ehci_hcd 0000:00:1d.0: >setting latency timer to 64

[ 2738.134950] r8169 0000:05:00.0: >wake-up capability disabled by ACPI

[ 2738.134952] ahci 0000:00:1f.2: >setting latency timer to 64

[ 2738.136959] mei 0000:00:16.0: >wd: failed to find the client

[ 2738.180856] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

[ 2738.315364] PM: resume of drv: dev:ep_00 complete after 176.290 msecs

[ 2738.315367] PM: resume of drv:hub dev:2-1:1.0 complete after 176.324 msecs

[ 2738.315375] PM: resume of drv:hub dev:1-1:1.0 complete after 176.743 msecs

[ 2738.315378] PM: resume of drv: dev:ep_81 complete after 176.321 msecs

[ 2738.315383] PM: resume of drv:usb dev:1-1.4 complete after 176.008 msecs

[ 2738.315385] PM: resume of drv:usb dev:1-1.1 complete after 176.301 msecs

[ 2738.315387] PM: resume of drv: dev:ep_00 complete after 176.724 msecs

[ 2738.315392] PM: resume of drv:usb dev:1-1.2 complete after 176.197 msecs

[ 2738.315394] PM: resume of drv:usb dev:1-1.5 complete after 176.136 msecs

[ 2738.315402] PM: resume of drv: dev:ep_81 complete after 176.757 msecs

[ 2738.363722] PM: resume of drv: dev:ep_00 complete after 224.651 msecs

[ 2738.363724] PM: resume of drv:usb-storage dev:1-1.1:1.0 complete after 224.696 msecs

[ 2738.363733] PM: resume of drv: dev:ep_02 complete after 224.679 msecs

[ 2738.363736] PM: resume of drv:scsi dev:host6 complete after 224.656 msecs

[ 2738.363745] PM: resume of drv:scsi_host dev:host6 complete after 224.652 msecs

[ 2738.363760] PM: resume of drv: dev:ep_81 complete after 224.720 msecs

[ 2738.363762] PM: resume of drv:scsi dev:target6:0:0 complete after 224.504 msecs

[ 2738.363768] PM: resume of drv:sd dev:6:0:0:0 complete after 224.497 msecs

[ 2738.363806] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 224.521 msecs

[ 2738.364104] PM: resume of drv: dev:ep_00 complete after 224.932 msecs

[ 2738.364106] PM: resume of drv:usbhid dev:1-1.2:1.0 complete after 224.961 msecs

[ 2738.364141] PM: resume of drv: dev:ep_81 complete after 224.982 msecs

[ 2738.387322] usb 1-1.4: >reset full-speed USB device number 7 using ehci_hcd

[ 2738.467070] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 2738.472934] ata5.00: configured for UDMA/133

[ 2738.479223] usb 1-1.4: >device firmware changed

[ 2738.479551] PM: resume of drv: dev:ep_00 complete after 340.314 msecs

[ 2738.479557] PM: resume of drv:btusb dev:1-1.4:1.0 complete after 340.413 msecs

[ 2738.479565] PM: resume of drv:btusb dev:1-1.4:1.1 complete after 340.369 msecs

[ 2738.479570] PM: resume of drv: dev:ep_82 complete after 340.401 msecs

[ 2738.479572] PM: resume of drv: dev:ep_83 complete after 340.364 msecs

[ 2738.479574] PM: resume of drv: dev:ep_81 complete after 340.418 msecs

[ 2738.479575] PM: resume of drv: dev:ep_03 complete after 340.353 msecs

[ 2738.479577] PM: resume of drv: dev:ep_02 complete after 340.393 msecs

[ 2738.491088] PM: resume of drv:scsi dev:host4 complete after 356.618 msecs

[ 2738.491100] PM: resume of drv:scsi dev:target4:0:0 complete after 352.534 msecs

[ 2738.491108] PM: resume of drv:sr dev:4:0:0:0 complete after 352.527 msecs

[ 2738.491121] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 352.525 msecs

[ 2738.491127] PM: resume of drv:scsi_host dev:host4 complete after 354.743 msecs

[ 2738.551087] usb 1-1.5: >reset high-speed USB device number 6 using ehci_hcd

[ 2738.690218] PM: resume of drv: dev:ep_00 complete after 551.452 msecs

[ 2738.690252] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 551.508 msecs

[ 2738.690254] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 551.534 msecs

[ 2738.690315] PM: resume of drv: dev:ep_83 complete after 551.583 msecs

[ 2741.103130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2741.106889] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)

[ 2741.353338] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)

[ 2741.353739] ata1.00: configured for UDMA/133

[ 2741.366824] PM: resume of drv:ata_port dev:ata1 complete after 3232.103 msecs

[ 2741.366827] PM: resume of drv:scsi dev:host0 complete after 3236.696 msecs

[ 2741.366844] PM: resume of drv:scsi_host dev:host0 complete after 3236.714 msecs

[ 2741.366850] PM: resume of drv:scsi dev:target0:0:0 complete after 3234.244 msecs

[ 2741.366857] PM: resume of drv:sd dev:0:0:0:0 complete after 3234.237 msecs

[ 2741.366863] sd 0:0:0:0: >[sda] Starting disk

[ 2741.367623] Extended CMOS year: 2000

[ 2741.376840] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3242.788 msecs

[ 2741.376962] PM: resume of devices complete after 3248.246 msecs

[ 2741.377041] PM: resume devices took 3.248 seconds

[ 2741.377095] PM: Finishing wakeup.

[ 2741.377096] Restarting tasks ... done.

[ 2741.380398] video LNXVIDEO:00: >Restoring backlight state

[ 2741.450762] usb 2-1.6: >new high-speed USB device number 4 using ehci_hcd

[ 2741.769017] r8169 0000:05:00.0: >eth0: link down

[ 2741.769316] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 2741.798811] usb 2-1.6: >New USB device found, idVendor=0bda, idProduct=0138

[ 2741.798820] usb 2-1.6: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2741.798823] usb 2-1.6: >Product: USB2.0-CRW

[ 2741.798825] usb 2-1.6: >Manufacturer: Generic

[ 2741.798828] usb 2-1.6: >SerialNumber: 20090516388200000

[ 2741.810320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 2741.827594] scsi8 : usb-storage 2-1.6:1.0

[ 2741.828204] usb 1-1.4: >USB disconnect, device number 7

[ 2741.906028] usb 1-1.4: >new full-speed USB device number 8 using ehci_hcd

[ 2741.998588] usb 1-1.4: >New USB device found, idVendor=0cf3, idProduct=3002

[ 2741.998592] usb 1-1.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2742.253177] usb 2-1.6: >USB disconnect, device number 4

[ 2742.483942] usb 1-1.4: >USB disconnect, device number 8

[ 2742.592834] atkbd serio0: >Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).

[ 2742.592845] atkbd serio0: >Use 'setkeycodes e00d <keycode>' to make it known.

[ 2742.808858] usb 1-1.4: >new full-speed USB device number 9 using ehci_hcd

[ 2742.901289] usb 1-1.4: >New USB device found, idVendor=0cf3, idProduct=3005

[ 2742.901295] usb 1-1.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2743.879462] wlan0: authenticate with b0:48:7a:bd:3a:fa

[ 2743.892256] wlan0: send auth to b0:48:7a:bd:3a:fa (try 1/3)

[ 2743.894838] wlan0: authenticated

[ 2743.902873] wlan0: associate with b0:48:7a:bd:3a:fa (try 1/3)

[ 2743.905993] wlan0: RX AssocResp from b0:48:7a:bd:3a:fa (capab=0x431 status=0 aid=2)

[ 2743.906068] wlan0: associated

[ 2743.906518] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 2743.906643] cfg80211: Calling CRDA for country: US

[ 2743.912169] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912184] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912188] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912189] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912191] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912193] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912194] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912197] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912199] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912201] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912202] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912204] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912205] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912207] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912211] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912213] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912214] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912219] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:

[ 2743.912220] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912222] cfg80211: Disabling freq 2467 MHz

[ 2743.912224] cfg80211: Disabling freq 2472 MHz

[ 2743.912226] cfg80211: Disabling freq 2484 MHz

[ 2743.912245] ath: regdomain 0x8348 updated by CountryIE

[ 2743.912247] ath: EEPROM regdomain: 0x8348

[ 2743.912248] ath: EEPROM indicates we should expect a country code

[ 2743.912250] ath: doing EEPROM country->regdmn map search

[ 2743.912252] ath: country maps to regdmn code: 0x3a

[ 2743.912255] ath: Country alpha2 being used: US

[ 2743.912256] ath: Regpair used: 0x3a

[ 2743.912308] cfg80211: Regulatory domain changed to country: US

[ 2743.912312] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 2743.912314] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 2743.912316] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)

[ 2743.912317] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 2743.912320] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 2743.912323] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 2743.912325] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

[ 4364.898680] wlan0: deauthenticating from b0:48:7a:bd:3a:fa by local choice (reason=3)

[ 4364.901913] cfg80211: All devices are disconnected, going to restore regulatory settings

[ 4364.901926] cfg80211: Restoring regulatory settings

[ 4364.901935] cfg80211: Calling CRDA to update world regulatory domain

[ 4364.914677] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain

[ 4364.917591] cfg80211: World regulatory domain updated:

[ 4364.917598] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 4364.917603] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 4364.917608] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 4364.917612] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 4364.917617] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 4364.917620] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 4366.086663] PM: Syncing filesystems ... done.

[ 4366.092458] PM: Preparing system for mem sleep

[ 4366.238764] Freezing user space processes ... (elapsed 0.01 seconds) done.

[ 4366.254642] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4366.270663] PM: Entering mem sleep

[ 4366.270820] Suspending console(s) (use no_console_suspend to debug)

[ 4366.271351] sd 0:0:0:0: >[sda] Synchronizing SCSI cache

[ 4366.271862] sd 0:0:0:0: >[sda] Stopping disk

[ 4366.282541] pciehp 0000:00:1c.7:pcie04: >pciehp_suspend ENTRY

[ 4366.506202] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 223.963 msecs

[ 4366.888963] PM: suspend of drv:sd dev:0:0:0:0 complete after 618.527 msecs

[ 4366.889030] PM: suspend of drv:scsi dev:target0:0:0 complete after 618.552 msecs

[ 4366.889075] PM: suspend of drv:scsi dev:host0 complete after 608.746 msecs

[ 4366.901727] PM: suspend of drv: dev:ata1 complete after 621.344 msecs

[ 4366.917583] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 637.203 msecs

[ 4366.917660] PM: suspend of drv: dev:pci0000:00 complete after 635.969 msecs

[ 4366.917671] PM: suspend of devices complete after 647.712 msecs

[ 4366.917674] PM: suspend devices took 0.648 seconds

[ 4366.917799] PM: late suspend of devices complete after 0.123 msecs

[ 4366.933747] r8169 0000:05:00.0: >wake-up capability enabled by ACPI

[ 4366.953309] ehci_hcd 0000:00:1d.0: >wake-up capability enabled by ACPI

[ 4366.969398] ehci_hcd 0000:00:1a.0: >wake-up capability enabled by ACPI

[ 4366.997556] PM: noirq suspend of devices complete after 79.870 msecs

[ 4366.997779] ACPI: Preparing to enter system sleep state S3

[ 4367.007456] PM: Saving platform NVS memory

[ 4367.016812] Disabling non-boot CPUs ...

[ 4367.018600] CPU 1 is now offline

[ 4367.020399] CPU 2 is now offline

[ 4367.022127] CPU 3 is now offline

[ 4367.022442] Extended CMOS year: 2000

[ 4367.023474] ACPI: Low-level resume complete

[ 4367.023515] PM: Restoring platform NVS memory

[ 4367.024424] Extended CMOS year: 2000

[ 4367.024460] Enabling non-boot CPUs ...

[ 4367.024562] Booting Node 0 Processor 1 APIC 0x2

[ 4367.037997] CPU1 is up

[ 4367.038063] Booting Node 0 Processor 2 APIC 0x1

[ 4367.051489] CPU2 is up

[ 4367.051596] Booting Node 0 Processor 3 APIC 0x3

[ 4367.065092] CPU3 is up

[ 4367.069223] ACPI: Waking up from system sleep state S3

[ 4367.094623] ehci_hcd 0000:00:1a.0: >wake-up capability disabled by ACPI

[ 4367.097618] ehci_hcd 0000:00:1d.0: >wake-up capability disabled by ACPI

[ 4367.097995] PM: noirq resume of devices complete after 6.622 msecs

[ 4367.098065] PM: early resume of devices complete after 0.046 msecs

[ 4367.098114] i915 0000:00:02.0: >setting latency timer to 64

[ 4367.098128] ehci_hcd 0000:00:1a.0: >setting latency timer to 64

[ 4367.098162] mei 0000:00:16.0: >irq 44 for MSI/MSI-X

[ 4367.098192] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X

[ 4367.098209] pciehp 0000:00:1c.7:pcie04: >pciehp_resume ENTRY

[ 4367.098221] ehci_hcd 0000:00:1d.0: >setting latency timer to 64

[ 4367.098243] r8169 0000:05:00.0: >wake-up capability disabled by ACPI

[ 4367.098249] ahci 0000:00:1f.2: >setting latency timer to 64

[ 4367.100461] mei 0000:00:16.0: >wd: failed to find the client

[ 4367.144579] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

[ 4367.279109] PM: resume of drv:hub dev:2-1:1.0 complete after 176.590 msecs

[ 4367.279113] PM: resume of drv:usb dev:1-1.1 complete after 176.558 msecs

[ 4367.279116] PM: resume of drv:hub dev:1-1:1.0 complete after 176.986 msecs

[ 4367.279118] PM: resume of drv:usb dev:1-1.2 complete after 176.475 msecs

[ 4367.279121] PM: resume of drv: dev:ep_81 complete after 176.590 msecs

[ 4367.279125] PM: resume of drv: dev:ep_00 complete after 176.588 msecs

[ 4367.279127] PM: resume of drv: dev:ep_81 complete after 176.992 msecs

[ 4367.279135] PM: resume of drv:usb dev:1-1.5 complete after 176.451 msecs

[ 4367.279136] PM: resume of drv: dev:ep_00 complete after 176.988 msecs

[ 4367.279140] PM: resume of drv:usb dev:1-1.4 complete after 176.357 msecs

[ 4367.327484] PM: resume of drv: dev:ep_00 complete after 224.954 msecs

[ 4367.327487] PM: resume of drv:usb-storage dev:1-1.1:1.0 complete after 224.992 msecs

[ 4367.327498] PM: resume of drv:scsi dev:host6 complete after 224.958 msecs

[ 4367.327499] PM: resume of drv: dev:ep_02 complete after 224.984 msecs

[ 4367.327505] PM: resume of drv:scsi_host dev:host6 complete after 224.953 msecs

[ 4367.327522] PM: resume of drv: dev:ep_81 complete after 225.019 msecs

[ 4367.327524] PM: resume of drv:scsi dev:target6:0:0 complete after 224.848 msecs

[ 4367.327533] PM: resume of drv:sd dev:6:0:0:0 complete after 224.846 msecs

[ 4367.327603] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 224.904 msecs

[ 4367.327635] PM: resume of drv: dev:ep_00 complete after 225.034 msecs

[ 4367.327638] PM: resume of drv:usbhid dev:1-1.2:1.0 complete after 225.059 msecs

[ 4367.327674] PM: resume of drv: dev:ep_81 complete after 225.085 msecs

[ 4367.351031] usb 1-1.5: >reset high-speed USB device number 6 using ehci_hcd

[ 4367.438817] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 4367.444234] ata5.00: configured for UDMA/133

[ 4367.478823] PM: resume of drv:scsi dev:host4 complete after 381.067 msecs

[ 4367.478836] PM: resume of drv:scsi_host dev:host4 complete after 381.079 msecs

[ 4367.478839] PM: resume of drv:scsi dev:target4:0:0 complete after 376.819 msecs

[ 4367.478849] PM: resume of drv:sr dev:4:0:0:0 complete after 376.821 msecs

[ 4367.478886] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 376.845 msecs

[ 4367.490380] PM: resume of drv: dev:ep_00 complete after 387.960 msecs

[ 4367.490395] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 388.012 msecs

[ 4367.490397] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 387.988 msecs

[ 4367.490438] PM: resume of drv: dev:ep_83 complete after 388.045 msecs

[ 4367.514877] usb 1-1.4: >reset full-speed USB device number 9 using ehci_hcd

[ 4367.606849] usb 1-1.4: >device firmware changed

[ 4367.607216] PM: resume of drv: dev:ep_00 complete after 504.811 msecs

[ 4367.607234] PM: resume of drv:btusb dev:1-1.4:1.1 complete after 504.877 msecs

[ 4367.607236] PM: resume of drv:btusb dev:1-1.4:1.0 complete after 504.926 msecs

[ 4367.607247] PM: resume of drv: dev:ep_82 complete after 504.916 msecs

[ 4367.607253] PM: resume of drv: dev:ep_02 complete after 504.910 msecs

[ 4367.607254] PM: resume of drv: dev:ep_03 complete after 504.873 msecs

[ 4367.607264] PM: resume of drv: dev:ep_81 complete after 504.946 msecs

[ 4367.607267] PM: resume of drv: dev:ep_83 complete after 504.900 msecs

[ 4370.058904] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 4370.062303] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)

[ 4370.308199] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)

[ 4370.308610] ata1.00: configured for UDMA/133

[ 4370.322599] PM: resume of drv:scsi dev:host0 complete after 3229.116 msecs

[ 4370.322603] PM: resume of drv:ata_port dev:ata1 complete after 3224.428 msecs

[ 4370.322614] PM: resume of drv:scsi_host dev:host0 complete after 3229.128 msecs

[ 4370.322617] PM: resume of drv:scsi dev:target0:0:0 complete after 3226.579 msecs

[ 4370.322626] PM: resume of drv:sd dev:0:0:0:0 complete after 3226.577 msecs

[ 4370.322632] sd 0:0:0:0: >[sda] Starting disk

[ 4370.323502] Extended CMOS year: 2000

[ 4370.331603] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3234.051 msecs

[ 4370.331697] PM: resume of devices complete after 3238.446 msecs

[ 4370.331776] PM: resume devices took 3.240 seconds

[ 4370.331830] PM: Finishing wakeup.

[ 4370.331831] Restarting tasks ... done.

[ 4370.335316] video LNXVIDEO:00: >Restoring backlight state

[ 4370.406463] usb 2-1.6: >new high-speed USB device number 5 using ehci_hcd

[ 4370.510860] usb 2-1.6: >New USB device found, idVendor=0bda, idProduct=0138

[ 4370.510874] usb 2-1.6: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 4370.510877] usb 2-1.6: >Product: USB2.0-CRW

[ 4370.510880] usb 2-1.6: >Manufacturer: Generic

[ 4370.510882] usb 2-1.6: >SerialNumber: 20090516388200000

[ 4370.536373] scsi9 : usb-storage 2-1.6:1.0

[ 4370.536779] usb 1-1.4: >USB disconnect, device number 9

[ 4370.610155] usb 1-1.4: >new full-speed USB device number 10 using ehci_hcd

[ 4370.702643] usb 1-1.4: >New USB device found, idVendor=0cf3, idProduct=3002

[ 4370.702648] usb 1-1.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 4370.708897] r8169 0000:05:00.0: >eth0: link down

[ 4370.709385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 4370.752480] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 4370.950758] usb 2-1.6: >USB disconnect, device number 5

[ 4371.077698] usb 1-1.4: >USB disconnect, device number 10

[ 4371.525117] atkbd serio0: >Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).

[ 4371.525121] atkbd serio0: >Use 'setkeycodes e00d <keycode>' to make it known.

[ 4371.644637] usb 1-1.4: >new full-speed USB device number 11 using ehci_hcd

[ 4371.737216] usb 1-1.4: >New USB device found, idVendor=0cf3, idProduct=3005

[ 4371.737222] usb 1-1.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 4372.803172] wlan0: authenticate with b0:48:7a:bd:3a:fa

[ 4372.815705] wlan0: send auth to b0:48:7a:bd:3a:fa (try 1/3)

[ 4372.818047] wlan0: authenticated

[ 4372.826705] wlan0: associate with b0:48:7a:bd:3a:fa (try 1/3)

[ 4372.829737] wlan0: RX AssocResp from b0:48:7a:bd:3a:fa (capab=0x431 status=0 aid=2)

[ 4372.829810] wlan0: associated

[ 4372.830246] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 4372.830791] cfg80211: Calling CRDA for country: US

[ 4372.833527] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833531] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833533] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833534] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833536] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833537] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833538] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833540] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833541] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833542] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833543] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833545] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833546] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833547] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833549] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833550] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833551] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:

[ 4372.833553] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 4372.833554] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:

Kada završite sa porukom pogledajte je. Ovaj put je izašla iz granica dozvoljenih za dužinu poruke..

**Kostić** · 03.11.2012. 11.50

Стављај ове исписе у [code ][/code] ознаке док те не нахвата админ. Big Grin

Промена: Сад је све ОК. beer

**zika** · (03-11-2012)

(03.11.2012. 11.50 )Kostić Piše: Стављај ове исписе у ознаке док те не нахвата админ.

Stavljene su u oznake ali je prekoračena (u svakom smislu) dozvoljena dužina poruke. Na žalost baš na način koji niko ikada neće pročitati...

(03.11.2012. 11.50 )Kostić Piše: Промена: Сад је све ОК.

Naravno, kada sam ispravio, loveći mesto za prekid desetak minuta...
Zaboravih: nisam admin...

**combuster** · 03.11.2012. 11.57

Hm, jesi li ti ovo terao STR (Suspend to RAM) na laptopu ? U dmesg-u i Xorg.0.log-u nema nigde greske ali pokazuje da ti je od boot-a dva puta lap otisao u suspend. Ako nisi ti inicirao isti, pokusaj da iskljucis suspend i hibernate u power management opcijama pa vidi da li ti se isto dogadja. Sta je sa izlazom od

Kod:

sudo cat /sys/kernel/debug/dri/0/i915_error_state

komande, ima li tamo nesto ?

klmd · 03.11.2012. 12.09

Kod:

sudo cat /sys/kernel/debug/dri/0/i915_error_state

јавља

Kod:

no error state collected

Што се тиче суспендовања немам појма можда се једном десило. Можда ми се порука јавља приликом паљења рачунара.

**combuster** · 03.11.2012. 12.41

Ja ne znam na osnovu cega apport prijavljuje bug sa intelovim drajverom, nema oops-a u kernel logovima, i915_error_state pokazuje da nije bilo gresaka, Xorg.0.log cist, jedino sto vidim jeste da ti se masina budi iz STR-a i to dva puta - verovatno si samo preklopio lid kada si gasio laptop a nisi isao na shutdown a u power management opcijama ti stoji STR kada za trigger imas preklapanje ekrana.

Pokusaj da u power management opcijama iskljucis suspend i hibernaciju i da vidis da li ti se ta greska opet javlja kroz apport.

I ja imam HD2000 i problem sa DPMS-om, ekran mi se gasi sam na svakih par sekundi a budi se na pokret misa (SNA, najnoviji video-intel i kernel, isto mi se desava i na stabilnoj i rc verziji) ali buduci da nista nisam nasao po logovima vise vidim KDE kao krivca...

***uros*** · 03.11.2012. 15.12

(03.11.2012. 12.41 )combuster Piše: ali buduci da nista nisam nasao po logovima vise vidim KDE kao krivca...

[offtopic] eeee, sine Brute...[/offtopic]

**nihil_enochian** · 03.11.2012. 16.20

Ako zelis da uklonis to za prijavljivanje gresaka,da ti ne iskace stalno ukucaj u terminal sledecu komadnu i resen problem:

Kod:

sudo sed -i 's/enabled=1/enabled=0/g' /etc/default/apport

shime · 03.11.2012. 16.43

I meni je prvog dana od instaliranja 12.04 sa Uniti izbacivao neku gresku (takodje Intel) ali sad sa Gnome shell nema nikakve greske. Mozda novi uniti ne saradjuje najbolje sa Intelom.

**zika** · (04-11-2012)

(03.11.2012. 16.43 )shime Piše: I meni je prvog dana od instaliranja 12.04 sa Uniti izbacivao neku gresku (takodje Intel) ali sad sa Gnome shell nema nikakve greske. Mozda novi uniti ne saradjuje najbolje sa Intelom.

Ili

Kod:

echo "manual" | sudo tee -a /etc/init/apport.override

Te se apport neće ni podizati kao service...

Niz \| Puni Prikaz Грешка система
Autor	Poruka