Niz | Puni Prikaz

tulipan · 31.10.2012. 23.10

Pozdrav kolege.Koristim Ubuntu 12.4-64.Probao sam danas da prikliučim komp na plazmu tv 107cm i posle ponovnog priključenja na monitor Benq 22" rezolucija je 1360x768 umesto 1850x1050.Probao sam i reinstalaciju drajvera i isto.Na moje iznenađenje probao sam i Kubuntu 12.4 koga nisam koristio mesec dana kad i tamo isto.Na drugom HD imam win7 koga i ne koristim, prilikom podizanja bila je ista rezolucija ali sam je podigao na 1850x1050 i radi normalno.U upravljačkom programu stoji da je instaliran current driver.Evo ispisa sa terminala:

Kod:

ivan@ivan-System-Product-Name:~$ lspci -knn | grep VGA -A 5

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1)

    Subsystem: Micro-Star International Co., Ltd. NX8500GT-TD512EH/M2 [1462:0960]

    Kernel driver in use: nvidia

    Kernel modules: nvidia_current, nouveau, nvidiafb

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)

    Subsystem: ASUSTeK Computer Inc. Device [1043:8347]

ivan@ivan-System-Product-Name:~$ dpkg -l | grep nvidia

rc  nvidia-173                                173.14.30-0ubuntu8                                   NVIDIA binary Xorg driver, kernel module and VDPAU library

ii  nvidia-common                             1:0.2.44.2                                           Find obsolete NVIDIA drivers

ii  nvidia-current                            304.60-0ubuntu1~precise~xup2                         NVIDIA binary Xorg driver, kernel module and VDPAU library

rc  nvidia-current-updates                    304.43-0ubuntu0.1                                    NVIDIA binary Xorg driver, kernel module and VDPAU library

rc  nvidia-experimental-304                   304.48-0ubuntu0.1                                    Experimental NVIDIA binary Xorg driver, kernel module and VDPAU library

ii  nvidia-settings                           295.33-0ubuntu1                                      Tool of configuring the NVIDIA graphics driver

ii  nvidia-settings-updates                   304.43-0ubuntu0.2                                    Tool of configuring the NVIDIA graphics driver

ivan@ivan-System-Product-Name:~$

Koristite „code“ tag-ove. Hvala. http://forum.ubuntu-rs.org/Thread-novi-p...#pid193985

PS nešto code tagovi ne rade.

**promis** · 31.10.2012. 23.21

(31.10.2012. 23.10 )tulipan Piše: PS nešto code tagovi ne rade.

Jel, nisam primetio.

Čekaj, zar ne treba 1680x1050?

tulipan · 31.10.2012. 23.30

Moše biti, ne mogu da se setim kolika je bila rezolucija ranije, nisam proveravao.Pardon za tagove , sad sam video da mora ručno da se ubace.

**promis** · 31.10.2012. 23.37

Jel si probao u nvidia settings da promeniš veličinu slike?

tulipan · 31.10.2012. 23.41

Da, i tu mi je maximalna rezolucija 1360x768.

**zika** · (05-11-2012)

Ne rade u FF16+. Postoji (čak) i thread o tome...

tulipan · 01.11.2012. 18.17

Gospon Žiko video sam to juče, al nakon pisanija.U svakom slučaju problem sa grafikom ostaje.

Sad sam proverio na računaru od klinca, tamo je normalna rezolucija 1650x1050, znači nije do monitora nego do drajvera, a šta nemam pojma.

tulipan · 05.11.2012. 18.28

Reinstalirao sam sistem, instalirao drajver (verzija 304.51) i opet isto.Ubuntu mi je na jednom HD a na drugom Kubuntu 12.4 i win7.Na win-u je rezolucija normalna a (K)Ubuntu katastrofa.Znači nije ni do monitora, ni do drajvera, čak mi je i prilikon korišćenja live cd-a rezolucija manja nego što treba.

**promis** · 05.11.2012. 18.39

Navedi tačan naziv, model monitora. Daj sadržaj Xorg.0.log fajla.

~~dvajedan~~ · 05.11.2012. 18.42

Falični EDID od monitora again Smile

. Ako je i sa nouveau i sa nvidia isto xrandr Big Grin

.

edit: Mada sad sam pročitao prvih par rečenica... Ti si znači imao dobru rezoluciju, ali si je zauvek izgubio posle prikjučivanja na plazmu?

tulipan · 05.11.2012. 19.05

Nije do monitora, zamenio sam monitore sa sve kablom sa klincovog računara, na njegovom radi normalno, a njegov monitor na mom računari pokazuje iste simptome.Čak mi ni ne prepoznaje monitor-izbaci nepoznat- znači grafička karta ima problem sa prepoznavanjem monitora.Najviše što me buni je što u win-u radi normalno.Monitor je BENQ fp202wa.
@promis kako da dođem do Xorg.0.log fajla?

**promis** · 05.11.2012. 19.06

Nalazi se /var/log/Xorg.0.log
okači ga ovde kao prilog
a mogao si da ga nađeš komandom locate

Kod:

locate Xorg.0.log

**zika** · 05.11.2012. 19.14

(05.11.2012. 19.06 )promis Piše: Nalazi se /var/log/Xorg.0.log
okači ga ovde kao prilog
a mogao si da ga nađeš komandom locate

Kod:

locate Xorg.0.log

Kod:

sudo updatedb

pre toga jer se ne zna kada (i da li je) uopšte rađen...

tulipan · 05.11.2012. 19.20

Kod:

[    19.040] 

X.Org X Server 1.13.0

Release Date: 2012-09-05

[    19.040] X Protocol Version 11, Revision 0

[    19.040] Build Operating System: Linux 3.2.0-26-generic i686 Ubuntu

[    19.040] Current Operating System: Linux ivan-System-Product-Name 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 i686

[    19.040] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=bed269e2-fd1c-4c39-8f4d-8913add8c2cb ro quiet splash

[    19.040] Build Date: 08 October 2012  03:34:08PM

[    19.040] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 

[    19.040] Current version of pixman: 0.26.0

[    19.040]     Before reporting problems, check http://wiki.x.org

    to make sure that you have the latest version.

[    19.040] Markers: (--) probed, (**) from config file, (==) default setting,

    (++) from command line, (!!) notice, (II) informational,

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    19.040] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  5 18:46:24 2012

[    19.041] (==) Using config file: "/etc/X11/xorg.conf"

[    19.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    19.041] (==) ServerLayout "Layout0"

[    19.041] (**) |-->Screen "Screen0" (0)

[    19.041] (**) |   |-->Monitor "Monitor0"

[    19.041] (**) |   |-->Device "Device0"

[    19.041] (**) |-->Input Device "Keyboard0"

[    19.041] (**) |-->Input Device "Mouse0"

[    19.041] (**) Option "Xinerama" "0"

[    19.041] (==) Automatically adding devices

[    19.041] (==) Automatically enabling devices

[    19.041] (==) Automatically adding GPU devices

[    19.041] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    19.041]     Entry deleted from font path.

[    19.041] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.

[    19.041]     Entry deleted from font path.

[    19.041] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    19.041]     Entry deleted from font path.

[    19.041] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.

[    19.041]     Entry deleted from font path.

[    19.042] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    19.042]     Entry deleted from font path.

[    19.042] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.

[    19.042]     Entry deleted from font path.

[    19.042] (==) FontPath set to:

    /usr/share/fonts/X11/misc,

    /usr/share/fonts/X11/Type1,

    built-ins

[    19.042] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"

[    19.042] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.

[    19.042] (WW) Disabling Keyboard0

[    19.042] (WW) Disabling Mouse0

[    19.042] (II) Loader magic: 0xb77ee640

[    19.042] (II) Module ABI versions:

[    19.042]     X.Org ANSI C Emulation: 0.4

[    19.042]     X.Org Video Driver: 13.0

[    19.042]     X.Org XInput driver : 18.0

[    19.042]     X.Org Server Extension : 7.0

[    19.043] (--) PCI:*(0:1:0:0) 10de:0421:1462:0960 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072

[    19.043] (II) Open ACPI successful (/var/run/acpid.socket)

[    19.043] Initializing built-in extension Generic Event Extension

[    19.043] Initializing built-in extension SHAPE

[    19.043] Initializing built-in extension MIT-SHM

[    19.043] Initializing built-in extension XInputExtension

[    19.043] Initializing built-in extension XTEST

[    19.043] Initializing built-in extension BIG-REQUESTS

[    19.043] Initializing built-in extension SYNC

[    19.043] Initializing built-in extension XKEYBOARD

[    19.043] Initializing built-in extension XC-MISC

[    19.043] Initializing built-in extension SECURITY

[    19.043] Initializing built-in extension XINERAMA

[    19.043] Initializing built-in extension XFIXES

[    19.044] Initializing built-in extension RENDER

[    19.044] Initializing built-in extension RANDR

[    19.044] Initializing built-in extension COMPOSITE

[    19.044] Initializing built-in extension DAMAGE

[    19.044] Initializing built-in extension MIT-SCREEN-SAVER

[    19.044] Initializing built-in extension DOUBLE-BUFFER

[    19.044] Initializing built-in extension RECORD

[    19.044] Initializing built-in extension DPMS

[    19.045] Initializing built-in extension X-Resource

[    19.045] Initializing built-in extension XVideo

[    19.045] Initializing built-in extension XVideo-MotionCompensation

[    19.045] Initializing built-in extension XFree86-VidModeExtension

[    19.045] Initializing built-in extension XFree86-DGA

[    19.045] Initializing built-in extension XFree86-DRI

[    19.045] Initializing built-in extension DRI2

[    19.045] (II) LoadModule: "glx"

[    19.045] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so

[    19.078] (II) Module glx: vendor="NVIDIA Corporation"

[    19.078]     compiled for 4.0.2, module version = 1.0.0

[    19.078]     Module class: X.Org Server Extension

[    19.078] (II) NVIDIA GLX Module  304.51  Tue Sep 18 17:58:56 PDT 2012

[    19.079] Loading extension GLX

[    19.079] (II) LoadModule: "nvidia"

[    19.079] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so

[    19.079] (II) Module nvidia: vendor="NVIDIA Corporation"

[    19.079]     compiled for 4.0.2, module version = 1.0.0

[    19.079]     Module class: X.Org Video Driver

[    19.079] (II) NVIDIA dlloader X Driver  304.51  Tue Sep 18 17:38:03 PDT 2012

[    19.079] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[    19.079] (++) using VT number 7

[    19.080] (II) Loading sub module "fb"

[    19.080] (II) LoadModule: "fb"

[    19.097] (II) Loading /usr/lib/xorg/modules/libfb.so

[    19.097] (II) Module fb: vendor="X.Org Foundation"

[    19.097]     compiled for 1.13.0, module version = 1.0.0

[    19.097]     ABI class: X.Org ANSI C Emulation, version 0.4

[    19.097] (II) Loading sub module "wfb"

[    19.097] (II) LoadModule: "wfb"

[    19.097] (II) Loading /usr/lib/xorg/modules/libwfb.so

[    19.097] (II) Module wfb: vendor="X.Org Foundation"

[    19.097]     compiled for 1.13.0, module version = 1.0.0

[    19.097]     ABI class: X.Org ANSI C Emulation, version 0.4

[    19.098] (II) Loading sub module "ramdac"

[    19.098] (II) LoadModule: "ramdac"

[    19.098] (II) Module "ramdac" already built-in

[    19.098] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32

[    19.098] (==) NVIDIA(0): RGB weight 888

[    19.098] (==) NVIDIA(0): Default visual is TrueColor

[    19.098] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

[    19.098] (**) NVIDIA(0): Option "Stereo" "0"

[    19.098] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"

[    19.098] (**) NVIDIA(0): Stereo disabled by request

[    19.098] (**) NVIDIA(0): Option "MetaModes" "1360x768 @1650x1050 +0+0; nvidia-auto-select +0+0; 1360x768 +0+0; 1360x768 +0+0; 1360x768_60 +0+0"

[    19.098] (**) NVIDIA(0): Enabling 2D acceleration

[    20.488] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

[    20.492] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)

[    20.492] (--) NVIDIA(0): Memory: 524288 kBytes

[    20.492] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.00

[    20.492] (II) NVIDIA(0): Detected PCI Express Link width: 16X

[    20.492] (--) NVIDIA(0): Interlaced video modes are supported on this GPU

[    20.495] (--) NVIDIA(0): Valid display device(s) on GeForce 8500 GT at PCI:1:0:0

[    20.495] (--) NVIDIA(0):     CRT-0

[    20.495] (--) NVIDIA(0):     CRT-1 (connected)

[    20.495] (--) NVIDIA(0):     TV-0

[    20.495] (--) NVIDIA(0):     DFP-0

[    20.495] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock

[    20.495] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock

[    20.495] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock

[    20.495] (--) NVIDIA(0): TV encoder: (null)

[    20.495] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock

[    20.495] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS

[    20.495] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    20.495] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on

[    20.495] (**) NVIDIA(0):     all display devices.)

[    20.500] (II) NVIDIA(0): Validated MetaModes:

[    20.500] (II) NVIDIA(0):     "1360x768@1650x1050+0+0"

[    20.500] (II) NVIDIA(0):     "nvidia-auto-select+0+0"

[    20.500] (II) NVIDIA(0):     "1360x768+0+0"

[    20.500] (II) NVIDIA(0):     "1360x768+0+0"

[    20.500] (II) NVIDIA(0):     "1360x768_60+0+0"

[    20.500] (II) NVIDIA(0): Virtual screen size determined to be 1650 x 1050

[    20.530] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI

[    20.530] (WW) NVIDIA(0):     from CRT-1's EDID.

[    20.530] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default

[    20.530] (--) Depth 24 pixmap format is 32 bpp

[    20.531] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.

[    20.538] (II) NVIDIA(0): Setting mode "1360x768@1650x1050+0+0"

[    20.593] Loading extension NV-GLX

[    20.625] (==) NVIDIA(0): Disabling shared memory pixmaps

[    20.625] (==) NVIDIA(0): Backing store disabled

[    20.625] (==) NVIDIA(0): Silken mouse enabled

[    20.625] (**) NVIDIA(0): DPMS enabled

[    20.625] Loading extension NV-CONTROL

[    20.626] Loading extension XINERAMA

[    20.626] (II) Loading sub module "dri2"

[    20.626] (II) LoadModule: "dri2"

[    20.626] (II) Module "dri2" already built-in

[    20.626] (II) NVIDIA(0): [DRI2] Setup complete

[    20.626] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

[    20.626] (--) RandR disabled

[    20.635] (II) Initializing extension GLX

[    20.650] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm

[    20.653] (II) config/udev: Adding input device Power Button (/dev/input/event1)

[    20.653] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    20.653] (II) LoadModule: "evdev"

[    20.654] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    20.654] (II) Module evdev: vendor="X.Org Foundation"

[    20.654]     compiled for 1.13.0, module version = 2.7.3

[    20.654]     Module class: X.Org XInput Driver

[    20.654]     ABI class: X.Org XInput driver, version 18.0

[    20.654] (II) Using input driver 'evdev' for 'Power Button'

[    20.654] (**) Power Button: always reports core events

[    20.654] (**) evdev: Power Button: Device: "/dev/input/event1"

[    20.654] (--) evdev: Power Button: Vendor 0 Product 0x1

[    20.654] (--) evdev: Power Button: Found keys

[    20.654] (II) evdev: Power Button: Configuring as keyboard

[    20.654] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"

[    20.654] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    20.654] (**) Option "xkb_rules" "evdev"

[    20.654] (**) Option "xkb_model" "pc105"

[    20.654] (**) Option "xkb_layout" "rs,rs"

[    20.654] (**) Option "xkb_variant" "latin,"

[    20.654] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"

[    20.656] (II) XKB: reuse xkmfile /var/lib/xkb/server-DB1BD49845FB52F82F309251A04864971C0E5357.xkm

[    20.657] (II) config/udev: Adding input device Power Button (/dev/input/event0)

[    20.657] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    20.657] (II) Using input driver 'evdev' for 'Power Button'

[    20.657] (**) Power Button: always reports core events

[    20.657] (**) evdev: Power Button: Device: "/dev/input/event0"

[    20.658] (--) evdev: Power Button: Vendor 0 Product 0x1

[    20.658] (--) evdev: Power Button: Found keys

[    20.658] (II) evdev: Power Button: Configuring as keyboard

[    20.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"

[    20.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    20.658] (**) Option "xkb_rules" "evdev"

[    20.658] (**) Option "xkb_model" "pc105"

[    20.658] (**) Option "xkb_layout" "rs,rs"

[    20.658] (**) Option "xkb_variant" "latin,"

[    20.658] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"

[    20.658] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)

[    20.658] (II) No input driver specified, ignoring this device.

[    20.658] (II) This device may have been added with another device file.

[    20.658] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event3)

[    20.658] (II) No input driver specified, ignoring this device.

[    20.658] (II) This device may have been added with another device file.

[    20.659] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event4)

[    20.659] (II) No input driver specified, ignoring this device.

[    20.659] (II) This device may have been added with another device file.

[    20.659] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)

[    20.659] (II) No input driver specified, ignoring this device.

[    20.659] (II) This device may have been added with another device file.

[    20.659] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)

[    20.659] (II) No input driver specified, ignoring this device.

[    20.659] (II) This device may have been added with another device file.

[    20.660] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event7)

[    20.660] (II) No input driver specified, ignoring this device.

[    20.660] (II) This device may have been added with another device file.

[    20.660] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event8)

[    20.660] (II) No input driver specified, ignoring this device.

[    20.660] (II) This device may have been added with another device file.

[    20.660] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)

[    20.660] (II) No input driver specified, ignoring this device.

[    20.660] (II) This device may have been added with another device file.

[    20.661] (II) config/udev: Adding input device saa7134 IR (ASUSTeK P7131 Analo (/dev/input/event11)

[    20.661] (**) saa7134 IR (ASUSTeK P7131 Analo: Applying InputClass "evdev keyboard catchall"

[    20.661] (II) Using input driver 'evdev' for 'saa7134 IR (ASUSTeK P7131 Analo'

[    20.661] (**) saa7134 IR (ASUSTeK P7131 Analo: always reports core events

[    20.661] (**) evdev: saa7134 IR (ASUSTeK P7131 Analo: Device: "/dev/input/event11"

[    20.661] (--) evdev: saa7134 IR (ASUSTeK P7131 Analo: Vendor 0x1043 Product 0x4845

[    20.661] (--) evdev: saa7134 IR (ASUSTeK P7131 Analo: Found keys

[    20.661] (II) evdev: saa7134 IR (ASUSTeK P7131 Analo: Configuring as keyboard

[    20.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc0/input11/event11"

[    20.661] (II) XINPUT: Adding extended input device "saa7134 IR (ASUSTeK P7131 Analo" (type: KEYBOARD, id 8)

[    20.661] (**) Option "xkb_rules" "evdev"

[    20.661] (**) Option "xkb_model" "pc105"

[    20.661] (**) Option "xkb_layout" "rs,rs"

[    20.661] (**) Option "xkb_variant" "latin,"

[    20.661] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"

[    20.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)

[    20.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[    20.661] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[    20.661] (**) AT Translated Set 2 keyboard: always reports core events

[    20.661] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"

[    20.661] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[    20.661] (--) evdev: AT Translated Set 2 keyboard: Found keys

[    20.661] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[    20.662] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"

[    20.662] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)

[    20.662] (**) Option "xkb_rules" "evdev"

[    20.662] (**) Option "xkb_model" "pc105"

[    20.662] (**) Option "xkb_layout" "rs,rs"

[    20.662] (**) Option "xkb_variant" "latin,"

[    20.662] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"

[    20.662] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event13)

[    20.662] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"

[    20.662] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'

[    20.662] (**) ImPS/2 Generic Wheel Mouse: always reports core events

[    20.662] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event13"

[    20.662] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5

[    20.662] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons

[    20.662] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)

[    20.662] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes

[    20.662] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes

[    20.662] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse

[    20.662] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support

[    20.662] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5

[    20.662] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    20.662] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"

[    20.662] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)

[    20.662] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.

[    20.663] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1

[    20.663] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0

[    20.663] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000

[    20.663] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4

[    20.663] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)

[    20.663] (II) No input driver specified, ignoring this device.

[    20.663] (II) This device may have been added with another device file.

[    20.665] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/event12)

[    20.665] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev pointer catchall"

[    20.665] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev keyboard catchall"

[    20.665] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (saa7134)'

[    20.665] (**) MCE IR Keyboard/Mouse (saa7134): always reports core events

[    20.665] (**) evdev: MCE IR Keyboard/Mouse (saa7134): Device: "/dev/input/event12"

[    20.665] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Vendor 0 Product 0

[    20.665] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found 3 mouse buttons

[    20.665] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found relative axes

[    20.665] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found x and y relative axes

[    20.665] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found keys

[    20.665] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as mouse

[    20.665] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as keyboard

[    20.665] (**) evdev: MCE IR Keyboard/Mouse (saa7134): YAxisMapping: buttons 4 and 5

[    20.665] (**) evdev: MCE IR Keyboard/Mouse (saa7134): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    20.665] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"

[    20.665] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (saa7134)" (type: KEYBOARD, id 11)

[    20.665] (**) Option "xkb_rules" "evdev"

[    20.665] (**) Option "xkb_model" "pc105"

[    20.665] (**) Option "xkb_layout" "rs,rs"

[    20.665] (**) Option "xkb_variant" "latin,"

[    20.665] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"

[    20.666] (II) evdev: MCE IR Keyboard/Mouse (saa7134): initialized for relative axes.

[    20.666] (**) MCE IR Keyboard/Mouse (saa7134): (accel) keeping acceleration scheme 1

[    20.666] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration profile 0

[    20.666] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration factor: 2.000

[    20.666] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration threshold: 4

[    20.666] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/mouse0)

[    20.666] (II) No input driver specified, ignoring this device.

[    20.666] (II) This device may have been added with another device file.

[    21.355] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

[    21.355] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    21.355] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on

[    21.355] (**) NVIDIA(0):     all display devices.)

[    21.770] (II) NVIDIA(0): Setting mode "NULL"

[    21.792] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1024x768 +0+0"

[    22.336] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

[    22.336] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    22.336] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on

[    22.336] (**) NVIDIA(0):     all display devices.)

[    22.832] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

[    22.832] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    22.833] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on

[    22.833] (**) NVIDIA(0):     all display devices.)

[    23.986] (II) XKB: reuse xkmfile /var/lib/xkb/server-8C3648A5FD728529D869F46730BE1BC287DB231C.xkm

Au al sam za..bo sa code tagovima-sory.

**zika** · 05.11.2012. 19.24

(05.11.2012. 19.20 )tulipan Piše: Au al sam za..bo sa code tagovima-sory.

Ko priznaje pola mu se prašta. Ispravljeno...

~~dvajedan~~ · 05.11.2012. 19.26

Po verziji xorga i kernela bi se reklo da je ovo quantal Coffee

.

**promis** · 05.11.2012. 19.32

QQ ima kernel 3.5. Ovo je PP.

Kod:

[    20.488] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

Kao što smo i mislili.

Moraćeš da definišeš sam podatke za svoj monitor.
Napravi xorg.conf fajl. Najbolje je da odeš u nvidia X settings i tamo generišeš xorg.conf fajl i daš nam ovde pa ćemo mi da ga prepravimo.
xorg.conf je u /etc/X11

~~dvajedan~~ · 05.11.2012. 19.37

Kod:

[    19.040] Current Operating System: Linux ivan-System-Product-Name 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 i686

Jel ovo 3.5? I Xorg je 1.13. Ja koliko znam PP je sa 1.11. Smile

Ovo je QQ.

**promis** · 05.11.2012. 19.40

Pazi pazi,

Kod:

[    14.928] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu

[    14.928] Current Operating System: Linux 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64

Da, nisam shvatio da postoji "build" i "current" OS.
Jeste, on koristi QQ. Ovo moje je sa PP.

tulipan · 05.11.2012. 19.48

Kod:

# nvidia-settings: X configuration file generated by nvidia-settings

# nvidia-settings:  version 304.51  (buildd@panlong)  Fri Oct 12 12:53:52 UTC 2012

Section "ServerLayout"

    Identifier     "Layout0"

    Screen      0  "Screen0" 0 0

    InputDevice    "Keyboard0" "CoreKeyboard"

    InputDevice    "Mouse0" "CorePointer"

    Option         "Xinerama" "0"

EndSection

Section "Files"

EndSection

Section "InputDevice"

    # generated from default

    Identifier     "Mouse0"

    Driver         "mouse"

    Option         "Protocol" "auto"

    Option         "Device" "/dev/psaux"

    Option         "Emulate3Buttons" "no"

    Option         "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"

    # generated from default

    Identifier     "Keyboard0"

    Driver         "kbd"

EndSection

Section "Monitor"

    # HorizSync source: builtin, VertRefresh source: builtin

    Identifier     "Monitor0"

    VendorName     "Unknown"

    ModelName      "CRT-1"

    HorizSync       28.0 - 55.0

    VertRefresh     43.0 - 72.0

    Option         "DPMS"

EndSection

Section "Device"

    Identifier     "Device0"

    Driver         "nvidia"

    VendorName     "NVIDIA Corporation"

    BoardName      "GeForce 8500 GT"

EndSection

Section "Screen"

    Identifier     "Screen0"

    Device         "Device0"

    Monitor        "Monitor0"

    DefaultDepth    24

    Option         "Stereo" "0"

    Option         "nvidiaXineramaInfoOrder" "CRT-1"

    Option         "metamodes" "1360x768 @1650x1050 +0+0; nvidia-auto-select +0+0; 1360x768 +0+0; 1360x768 +0+0; 1360x768_60 +0+0"

    SubSection     "Display"

        Depth       24

    EndSubSection

EndSection

@promis ovo je xorg.conf fajl.I,da koristim QQ-32 probao sam da reinstalacijom odn instalacijom novog Ubuntu-a da popravim stvar.

Rešio tagove zahvaljujući gosn @Zika.

**promis** · 05.11.2012. 19.54

Ispravi sledeće redove

Kod:

HorizSync       28.0 - 55.0

    VertRefresh     43.0 - 72.0

     Option         "metamodes" "1360x768 @1650x1050 +0+0; nvidia-auto-select +0+0; 1360x768 +0+0; 1360x768 +0+0; 1360x768_60 +0+0"

u ovo

Kod:

HorizSync       31.0 - 81.0

    VertRefresh     56.0 - 76.0

     Option         "metamodes" "1680x1050_60 +0+0; nvidia-auto-select +0+0; 1360x768 +0+0; 1360x768 +0+0; 1360x768_60 +0+0"

Restartuj X, logout/login om.

AKo sam našao podatke za pravi monitor, pošto je BENQ fp202w 20", a ne 22" kako tulipan tvrdi.

~~dvajedan~~ · 05.11.2012. 20.07

Evo ga win drv:

Citat:;================================
;FP202W.INF 08/18/05 Ver. 1.0 JST
; Copyright © 2005, BenQ Corporation.
;
;================================
;
;------------------------------------------------
[Version]
signature="$CHICAGO$"
Class=Monitor
ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
Provider=%BenQ%
CatalogFile=FP202W.cat
DriverVer=08/18/2005, 1.0

;-------------------------------------------------
[ControlFlags]
ExcludeFromSelect.nt=Monitor\BNQ76C2
ExcludeFromSelect.nt=Monitor\BNQ76C3

[ClassInstall32]
AddReg=ClassAddReg32

[ClassAddReg32]
HKR,,,,%MonitorClassName%
HKR,,Icon,,"-1"
HKR,,NoInstallClass,,1

[DestinationDirs]
DefaultDestDir=11
FP202W_Analog.CopyFiles=23
FP202W_Digital.CopyFiles=23

[SourceDisksNames]
1=%diskname%,,

[SourceDisksFiles]
FP202W.icm=1

; Manufacturers
;-------------------------------------------------
[Manufacturer]
%BenQ%=BenQ

; Manufacturer sections
;-------------------------------------------------
[BenQ]
%FP202W_Analog%=FP202W_Analog.Install, Monitor\BNQ76C2
%FP202W_Digital%=FP202W_Digital.Install, Monitor\BNQ76C3

; Install Sections
;-------------------------------------------------

[FP202W_Analog.Install]
DelReg=DEL_CURRENT_REG
AddReg=FP202W_Analog.AddReg, 1680, DPMS
CopyFiles=FP202W_Analog.CopyFiles

[FP202W_Digital.Install]
DelReg=DEL_CURRENT_REG
AddReg=FP202W_Digital.AddReg, 1680, DPMS
CopyFiles=FP202W_Digital.CopyFiles

; AddReg & DelReg sections
;-------------------------------------------------

[DEL_CURRENT_REG]
HKR,MODES
HKR,,MaxResolution
HKR,,DPMS
HKR,,ICMProfile

[1680]
HKR,,MaxResolution,,"1680,1050"

[DPMS]
HKR,,DPMS,,1

; AddReg sections
;----------------------------------------------------------------------------------

[FP202W_Analog.AddReg]
HKR,"MODES\640,480",Mode1,,"30.0-84.0,56.0-76.0,-,-"
HKR,"MODES\800,600",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1024,768",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1280,1024",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1680,1050",Mode1,,"30.0-84.0,56.0-76.0,+,-"
HKR,,ICMProfile,0,"FP202W.icm"
HKR,,PreferredMode,,"1680,1050,60"

[FP202W_Digital.AddReg]
HKR,"MODES\640,480",Mode1,,"30.0-84.0,56.0-76.0,-,-"
HKR,"MODES\800,600",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1024,768",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1280,1024",Mode1,,"30.0-84.0,56.0-76.0,+,+"
HKR,"MODES\1680,1050",Mode1,,"30.0-84.0,56.0-76.0,+,-"
HKR,,ICMProfile,0,"FP202W.icm"
HKR,,PreferredMode,,"1680,1050,60"

;------------------------------------------------------------------------------------------

[FP202W_Analog.CopyFiles]
FP202W.icm

[FP202W_Digital.CopyFiles]
FP202W.icm

;------------------------------------------------------------------------------------------
[Strings]
diskname="BenQ LCD Monitor installation diskette"
BenQ="BenQ"
MonitorClassName="Monitor"
FP202W_Analog="BenQ FP202W (Analog)"
FP202W_Digital="BenQ FP202W (Digital)"

Daklem ide:

Citat:HKR,"MODES\1680,1050",Mode1,,"30.0-84.0,56.0-76.0,+,-"

tulipan · 05.11.2012. 20.32

Uradio sam kako je @promis napisao, odradio log in-log aut, čak i restart, u Nvidia seting se pojavila opcija za podešavanje rezolucije čak do 1920x1200, ali kad sam podesio na 1680x1050 ne može da podigne sliku, na monitoru se pojavi "Izvan dosega" i vrati se u pređašnje stanje.

Takođe ne prepoznaje monitor, odn još uvek je crt-1

**promis** · (05-11-2012)

Hajde prvo odaberi za refresh 60Hz.

ako to ne radi, probaj onda da zmeniš sa ovim vrednostima za horizontalno osveženje iz win drajvera
30 - 84

tulipan · 05.11.2012. 20.55

@promis, REŠENO -izlogovao sam se sa gnome-a, ulogovao na unity, tamo podesio rezoluciju i proradilo.Vratio sam se na gnome i sad je ok.Evo slike:

Jedino još nije pogodio koji mi je monitor, al dobro ni ja nisam znao tačno.

Verovatno Povezane Teme...
Tema:		Autor	Odgovora:	Pregleda:	Poslednja Poruka
	Driver za grafičku kartu	kit1line	7	1,341	25.11.2013. 21.34 Poslednja Poruka: kit1line
	[Rešeno] Problem sa diver-om za graficku karticu nvidia GeForce 7300 LE	acamup	22	3,102	22.08.2012. 15.52 Poslednja Poruka: promis
	Problem oko drajvera za graficku ATI Radeon HD 6870	NightLife91	7	1,615	22.08.2012. 00.52 Poslednja Poruka: dragan99
	Instalacija drivera za NVidia GeForce GT 540M karticu	Zmajche34	7	1,447	17.06.2012. 20.08 Poslednja Poruka: promis
	[Rešeno] Kako ugasiti nvidia karticu	Nemanja92	4	1,213	08.06.2012. 20.14 Poslednja Poruka: Nemanja92

Niz \| Puni Prikaz Problem sa driver-om za graficku karticu nvidia GeForce 8500gt
Autor	Poruka