Poruka: #1

E ovako, uzeh preko vipa onaj vodafone touch tacnije vodafone 547.
Dobbio sam usb kabal uz njega, i kada ga ukacim telefon se puni ali ga ubuntu ne prepoznaje nikako :?:

Ima li neko neku ideju?

Poruka: #2

Ako ti telefon ima kao opciju, kao što ima moja nokia 3310c, odaberi da glumi usb storage. Ako ti treba kao storage. I tako redom.
E sad daj izlaz iz sledeće dve komande nakon povezivanja telefona sa računarom

Poruka: #3

100% je fora sa tim usb storage. pogledaj u opcijama ja na samsungu moram namestiti "masovna memorija" opciju i onda ka konta kao flesh

Poruka: #4

Ima on mass storage da se izabere ali se nista ne desi.

Evo sta mi izbacuje

marko@marko-desktop:~$ dmesg|tail
[41795.784032] usb 2-1: device descriptor read/64, error -110
[41811.000035] usb 2-1: device descriptor read/64, error -110
[41811.216024] usb 2-1: new full speed USB device using uhci_hcd and address 20
[41826.328045] usb 2-1: device descriptor read/64, error -110
[41841.544931] usb 2-1: device descriptor read/64, error -110
[41841.761389] usb 2-1: new full speed USB device using uhci_hcd and address 21
[41852.168023] usb 2-1: device not accepting address 21, error -110
[41852.280028] usb 2-1: new full speed USB device using uhci_hcd and address 22
[41862.688024] usb 2-1: device not accepting address 22, error -110
[41862.689337] hub 2-0:1.0: unable to enumerate USB device on port 1

kada ukucam lsusb ne izbaci nista.

Poruka: #5

posle restartovanja kompa i kucanja iste komande.

marko@marko-desktop:~$ dmesg|tail
[ 413.512055] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[ 413.662685] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 413.662703] end_request: I/O error, dev sdb, sector 0
[ 413.662712] __ratelimit: 8 callbacks suppressed
[ 413.662718] Buffer I/O error on device sdb, logical block 0
[ 413.662729] Buffer I/O error on device sdb, logical block 1
[ 413.662734] Buffer I/O error on device sdb, logical block 2
[ 413.662739] Buffer I/O error on device sdb, logical block 3
[ 413.796107] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[ 414.068057] usb 2-1: reset full speed USB device using uhci_hcd and address 3
marko@marko-desktop:~$

Poruka: #6

Nemoguće je da ništa ne izbacuje sa komandom lsusb. Daj nam bilo šta što izbaci. recimo kod mene izgleda ovako
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0421:005d Nokia Mobile Phones
.
Daj nam malo duži rep iz dmesg-a, pošto mi se čini da u ovih deset redova nisu zahvaćene sve poruke u vezi usb-a. Mada se već vidi da nije dobro. Iskucaj

Poruka: #7

Evo:


marko@marko-desktop:~$ dmesg|tail -n 25
[ 952.355183] ehci_hcd 0000:00:10.3: PCI INT D disabled
[ 952.608062] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 967.720023] usb 2-1: device descriptor read/64, error -110
[ 976.271871] uhci_hcd 0000:00:10.2: remove, state 4
[ 976.272942] usb usb4: USB disconnect, address 1
[ 976.278405] uhci_hcd 0000:00:10.2: USB bus 4 deregistered
[ 976.278971] uhci_hcd 0000:00:10.2: PCI INT C disabled
[ 976.279217] uhci_hcd 0000:00:10.1: remove, state 4
[ 976.279437] usb usb3: USB disconnect, address 1
[ 976.280301] uhci_hcd 0000:00:10.1: USB bus 3 deregistered
[ 976.280782] uhci_hcd 0000:00:10.1: PCI INT B disabled
[ 976.281025] uhci_hcd 0000:00:10.0: remove, state 1
[ 976.281246] usb usb2: USB disconnect, address 1
[ 977.825434] hub 2-0:1.0: cannot reset port 1 (err = -19)
[ 977.825455] hub 2-0:1.0: cannot disable port 1 (err = -19)
[ 977.827593] hub 2-0:1.0: cannot reset port 1 (err = -19)
[ 977.827605] hub 2-0:1.0: cannot disable port 1 (err = -19)
[ 977.829405] hub 2-0:1.0: cannot reset port 1 (err = -19)
[ 977.829414] hub 2-0:1.0: cannot disable port 1 (err = -19)
[ 977.831194] hub 2-0:1.0: cannot reset port 1 (err = -19)
[ 977.831202] hub 2-0:1.0: cannot disable port 1 (err = -19)
[ 977.833056] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 977.833064] hub 2-0:1.0: cannot disable port 1 (err = -19)
[ 977.833842] uhci_hcd 0000:00:10.0: USB bus 2 deregistered
[ 977.833950] uhci_hcd 0000:00:10.0: PCI INT A disabled
marko@marko-desktop:~$

Poruka: #8

evo updatovao sam an verziju 9.04
i na istu komandu izbacuje ovo

marko@marko-desktop:~$ dmesg|tail -n 25
[ 290.316019] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 290.596024] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 290.888117] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 291.160020] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 291.424019] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 291.732016] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 292.008022] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 292.157933] sd 2:0:0:1: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 292.157942] end_request: I/O error, dev sdc, sector 32
[ 292.157952] Buffer I/O error on device sdc, logical block 4
[ 292.157959] Buffer I/O error on device sdc, logical block 5
[ 292.276039] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 292.556066] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 292.836041] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 293.116237] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 293.267151] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 293.267164] end_request: I/O error, dev sdb, sector 96
[ 293.396042] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 293.660039] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 293.948034] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 294.232025] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 309.344023] usb 2-2: device descriptor read/64, error -110
[ 324.560036] usb 2-2: device descriptor read/64, error -110
[ 324.776039] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 339.889690] usb 2-2: device descriptor read/64, error -110
marko@marko-desktop:~$


[Izmenjeno 6-7-10 markozmaj]

Poruka: #9

Koju verziju ubuntu-a ti inače imaš, nisi to naveo na početku.
I šta se dešava sa komandom
nemoguće je da ništa ne izbacuje kad to odkucaš, tu će se videti kako sistem vidi taj uređaj.
izgleda da opet nemamo sve relevatne poruke kad se uključi telefon iskucaj sledece i okači txt fajl


[Izmenjeno 7-7-10 promis]

Poruka: #10

Evo sada posle updata na verziju 9.10 na komandu lsusb izbaci ovo kad aje povezan fon preko usb kabla.

marko@marko-desktop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0e8d:0002 MediaTek Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
marko@marko-desktop:~$

Poruka: #11

evo ovako da li imaš pravo da mu privremeno izvadiš microSD karticu
i da vidiš kako će onda da ga prepoznaje :?:
(da li je poželjno da se ona vadi ako snima neka podešavanja ? )
http://www.gsmarena.com/vodafone_541-3043.php

jer u logu prikazuje da imaš u stvari dva diska

a jedan bi bio microSD od 2GB a ovaj drugi od 22 MB nisam siguran šta je ?
to izgleda ide preko istog smart card kontrolera mediatek 0e8d: 0002

i ond apočinju greške jer on vidi dva devices sdb i sdc na istom VID : PID :freak:

Citat:[ 413.000226] scsi 2:0:0:0: Direct-Access MEDIATEK FLASH DISK 6235 PQ: 0 ANSI: 0 CCS
[ 413.003133] scsi 2:0:0:1: Direct-Access MEDIATEK FLASH DISK 6235 PQ: 0 ANSI: 0 CCS
[ 413.003872] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 413.004046] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 413.022230] sd 2:0:0:0: [sdb] 3964928 512-byte logical blocks: (2.03 GB/1.89 GiB)
[ 413.031204] sd 2:0:0:0: [sdb] Write Protect is off
[ 413.031214] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 413.031219] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 413.045472] sd 2:0:0:1: [sdc] 44000 512-byte logical blocks: (22.5 MB/21.4 MiB)
[ 413.052727] sd 2:0:0:1: [sdc] Write Protect is off
[ 413.052738] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 413.052742] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 413.065939] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 413.065957] sdb: sdb1
[ 413.092204] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 413.092221] sdc:
[ 413.216111] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 413.378105]
[ 413.397036] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 413.397049] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 413.528042] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 413.852025] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 414.124043] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 414.276164] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 414.276180] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 414.397735] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 414.684031] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 415.008026] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 415.276180] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 415.576129] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 415.724659] sd 2:0:0:0: [sdb] Unhandled error code
[ 415.724668] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 415.724675] end_request: I/O error, dev sdb, sector 0
[ 415.724686] Buffer I/O error on device sdb, logical block 0
[ 415.724697] Buffer I/O error on device sdb, logical block 1

[Izmenjeno 7-7-10 dukenukem7]

[Izmenjeno 7-7-10 dukenukem7]

pravilo 17 .. mea DSDT mecum porto

Poruka: #12

zanimljivo :freak:
kada izvadim microSD karticu ocita mi taj od 22mb ali en mogu da ga otvorim

Poruka: #13

na osnovu nekih linkova postoje kernel parametri koji bi mogli da pomognu ali nisam siguran tačno koji

(*mislim da bi radilo za ubačenu SD karticom)

delay_use , usb-storage.delay_use ,usb-storage.quirks

https://lists.one-eyed-alien.net/piperma...04152.html
http://ubuntuforums.org/printthread.php?t=1300673&pp=75
http://www.draisberghof.de/usb_modeswitc....php?p=756

Citat:usb-storage.delay_use=
.[UMS] The delay in seconds before a new device is
.scanned for Logical Units (default 5).

usb-storage.quirks=
.[UMS] A list of quirks entries to supplement or
.override the built-in unusual_devs list. List
.entries are separated by commas. Each entry has
.the form VID: PID:Flags where VID and PID are Vendor
.and Product ID values (4-digit hex numbers) and
.Flags is a set of characters, each corresponding
.to a common usb-storage quirk flag as follows:
.c = FIX_CAPACITY (decrease the reported
.device capacity by one sector);
.i = IGNORE_DEVICE (don't bind to this
.device);
.l = NOT_LOCKABLE (don't try to lock and
.unlock ejectable media);
.m = MAX_SECTORS_64 (don't transfer more
.than 64 sectors = 32 KB at a time);
.r = IGNORE_RESIDUE (the device reports
.bogus residue values);
.s = SINGLE_LUN (the device has only one
.Logical Unit);
.w = NO_WP_DETECT (don't test whether the
.medium is write-protected).
.Example: quirks=0419:aaf5:rl,0421:0433:rc

tako što bi se recimo dodao boot parametar (prilikom bootovanja)

mislim da ga ovo s forsira da prikaže samo ovu karticu od 2GIGA ?
:?:
ili na druge načine u modprobe.d , zavisi


[Izmenjeno 7-7-10 dukenukem7]

pravilo 17 .. mea DSDT mecum porto

Poruka: #14

Ja sam nov u ovome tako da te nist nisam skontao :freak:

Poruka: #15

Daj nam opet izveštaj u slučaju kad je bez SD kartice.

Poruka: #16

evo ga