Poruka: #1

Poštovani ne mogu na pronađem na ubuntu 10.04 driver za web kameru. Moze li mi ko pomoci. Na kameni pise samo 12000K. Ne znam proizvođaca. Treba mi za skype.

Hvala na pomoci!!

Poruka: #2

Uključi kameru i daj

Poruka: #3

Kamara je prikljucena preko USB kabla, znaci exsterna je i kucao sam ovo u terminal međutim opet kamera nece da radi. Moze li malo detaljnjije objasnjenje sta trebam uraditi?

Hvala unarprijed!"

Poruka: #4

Hm, vidim nisi pratio baš forum...
Kad kažem "daj" to znači da ispis od komande koju dajem treba da kopiraš ovde u forumsku poruku.

Poruka: #5

Дај нам излаз lsusb наредбе.

Poruka: #6

sanela@sanela-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 1871:0306 Aveo Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Poruka: #7

Bus 001 Device 005: ID 1871:0306 Aveo Technology Corp.

Koliko vidim ta kamera je podržana još od 2009.

Daj
I molim te formatiraj ispis ovako
http://forum.ubuntu-rs.org/Thread-Kako-i...-na-forumu

---

Probaj da vidiš da li kamera radi u programu: guvcview

Poruka: #8

sanela@sanela-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 1871:0306 Aveo Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sanela@sanela-laptop:~$

Poruka: #9

Zašto si nam opet dao ispis od lsusb?

Poruka: #10

zbunio(la) se sa code-ovima.... opusteno samo....

Poruka: #11

Upravu si...od jutra je pravim... evo instaliram progam onaj sto mi je prijatelj sa forumu preporucio. cujemo se...

---

guvcview Probao sam sa ovim programom radi kada koristim terminal pokrene kameru, ali nece da je pokrene putem skypa. Kako da napravim ka kada kliknem ka onu ikonu na skypu da se kamera pokrene.


sanela@sanela-laptop:~$ guvcview
guvcview 1.1.3
Could not open /home/sanela/.guvcviewrc for read,
will try to create it
write /home/sanela/.guvcviewrc OK
video device: /dev/video0
/dev/video0 - device 1
Init. USB2.0 Camera (location: usb-0000:00:1d.7-5)
{ pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
{ discrete: width = 640, height = 480 }
Time interval between frame: 1/30,
{ discrete: width = 160, height = 120 }
Time interval between frame: 1/30,
{ discrete: width = 320, height = 240 }
Time interval between frame: 1/30,
{ discrete: width = 176, height = 144 }
Time interval between frame: 1/30,
{ discrete: width = 352, height = 288 }
Time interval between frame: 1/30,
checking format: 1196444237
Format unavailable: 1196444237.
Init v4L2 failed !!
Init video returned -2
trying minimum setup ...
video device: /dev/video0
/dev/video0 - device 1
Init. USB2.0 Camera (location: usb-0000:00:1d.7-5)
{ pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
{ discrete: width = 640, height = 480 }
Time interval between frame: 1/30,
{ discrete: width = 160, height = 120 }
Time interval between frame: 1/30,
{ discrete: width = 320, height = 240 }
Time interval between frame: 1/30,
{ discrete: width = 176, height = 144 }
Time interval between frame: 1/30,
{ discrete: width = 352, height = 288 }
Time interval between frame: 1/30,
checking format: 1448695129
Requested Format unavailable: get width 640 height 480
vid:1871
pid:0306
driver:uvcvideo
Failed to query control id=10094858: Ulazna/izlazna greška

(guvcview:4296): Gtk-CRITICAL **: gtk_widget_is_ancestor: assertion `ancestor != NULL' failed

(guvcview:4296): Gtk-CRITICAL **: gtk_widget_is_ancestor: assertion `ancestor != NULL' failed
write /home/sanela/.guvcviewrc OK
free controls
cleaned allocations - 100%
Closing portaudio ...OK

Poruka: #12

Moze li mi neko pomoci ...??? Ne vraca mi se na windows radi proklete kamer.???

Svaka pomoc je dobro dosla.

Poruka: #13

Znači kamera radi u programu guvcview. Što znači da je sa drajverom sve u redu.

Probaj ovo ako koristiš 32bit
Kod:
a ovo ako koristiš 64bit
Kod:

Poruka: #14

Opet ne radi ima li neka druga mogucnost ... slomi se trazeci po netu i nista.

Poruka: #15

Druze, imao sam slican problem, evo ti tema kako sam to resio....

Nije ista kamera u pitanju, ali definitivno moras da guglas

Ume to nekad da napravi tesku glavobolju