Datum i vreme: 13.01.2018., 15.50
Dobro Došli, Gost! (Prijava — Registracija)
Ubuntu-RS forumi
  • Početna
  • Pravilnik
  • Pretraga
  • Pomoć
  • Planeta
  • Wiki
  • Sajt
  • Kalendar
  • RSS
Nove poruke Današnje poruke Spisak članova Spisak prijatelja
Važno obaveštenje
Izašao je novi LiBRE, broj 47
Ubuntu 17.10 spreman je za preuzimanje

Ubuntu-RS forumi Arhiva Izdanja kojima je istekla podrška Ubuntu 12.04 LTS Precise Pangolin Ubuntu 12.04 LTS Precise Pangolin: Hardver v
« Prethodno 1 2 3 4 5 Sledeće »

Xubuntu Microsoft Wireless Desktop 800

Odgovori 
 
Ocena Teme:
  • 0 Glasov(a) - 0 Prosečno
  • 1
  • 2
  • 3
  • 4
  • 5
Niz | Puni Prikaz
Microsoft Wireless Desktop 800
Autor Poruka
AleXboY Nije na vezi
Član
***

Poruka: 55
Dao zahvalnica: 7
Dobio zahvalnica: 7 u 6 poruka
Pridružen: Feb 2012
Ugled: 0
Poruka: #1
Microsoft Wireless Desktop 800
Pozdrav svima!
Kupio wireless tastaturu i miš.
Povežen, tj. ubacim mali usb, i neće. Restartujem komp, opet neće.
Plastika: Microsoft Wireless Desktop 800

dmesg
Kod:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-31-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:17:36 UTC 2012 (Ubuntu 3.2.0-31.50-generic 3.2.28)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ef0000 - 0000000037ef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037ef3000 - 0000000037f00000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 06/16/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x37ef0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f3ca0] f3ca0
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 35616000 - 3698a000
[    0.000000] ACPI: RSDP 000f80b0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 37ef3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[    0.000000] ACPI: FACP 37ef3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 37ef3100 05B56 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 37ef0000 00040
[    0.000000] ACPI: SSDT 37ef8d40 00115 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 37ef8e80 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 37ef8ec0 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[    0.000000] ACPI: APIC 37ef8c80 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 6MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00037ef0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00037ef0
[    0.000000] On node 0 totalpages: 228991
[    0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map f70fd200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 14 pages used for memmap
[    0.000000]   HighMem zone: 1764 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f70c3000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227201
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=235bee1a-953b-4a5e-bdf5-51f2174d3247 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3665408 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00037ef0)
[    0.000000] Memory: 874244k/916416k available (5618k kernel code, 41720k reserved, 2762k data, 712k init, 7112k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1830000 - 0xc18e2000   ( 712 kB)
[    0.000000]       .data : 0xc157cb04 - 0xc182f5c0   (2762 kB)
[    0.000000]       .text : 0xc1000000 - 0xc157cb04   (5618 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2210.225 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.45 BogoMIPS (lpj=8840900)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004042] Security Framework initialized
[    0.004065] AppArmor: AppArmor initialized
[    0.004067] Yama: becoming mindful.
[    0.004139] Mount-cache hash table entries: 512
[    0.004301] Initializing cgroup subsys cpuacct
[    0.004308] Initializing cgroup subsys memory
[    0.004319] Initializing cgroup subsys devices
[    0.004322] Initializing cgroup subsys freezer
[    0.004325] Initializing cgroup subsys blkio
[    0.004334] Initializing cgroup subsys perf_event
[    0.004362] mce: CPU supports 5 MCE banks
[    0.004373] using AMD E400 aware idle routine
[    0.004614] SMP alternatives: switching to UP code
[    0.015751] ACPI: Core revision 20110623
[    0.022044] ftrace: allocating 25901 entries in 51 pages
[    0.024110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068118] CPU0: AMD Sempron(tm) Processor LE-1250 stepping 02
[    0.072003] Performance Events: AMD PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              48
[    0.072003] ... generic registers:      4
[    0.072003] ... value mask:             0000ffffffffffff
[    0.072003] ... max period:             00007fffffffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             000000000000000f
[    0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.072003] Brought up 1 CPUs
[    0.072003] Total of 1 processors activated (4420.45 BogoMIPS).
[    0.072003] devtmpfs: initialized
[    0.072003] EVM: security.selinux
[    0.072003] EVM: security.SMACK64
[    0.072003] EVM: security.capability
[    0.072003] PM: Registering ACPI NVS region at 37ef0000 (12288 bytes)
[    0.072003] print_constraints: dummy:
[    0.072003] RTC time: 23:25:26, date: 09/25/12
[    0.072003] NET: Registered protocol family 16
[    0.072003] EISA bus registered
[    0.072003] node 0 link 0: io port [8000, ffff]
[    0.072003] TOM: 0000000040000000 aka 1024M
[    0.072003] node 0 link 0: mmio [a0000, bffff]
[    0.072003] node 0 link 0: mmio [40000000, efffffff]
[    0.072003] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.072003] node 0 link 0: mmio [f0000000, f03fffff]
[    0.072003] bus: [00, 04] on node 0 link 0
[    0.072003] bus: 00 index 0 [io  0x0000-0xffff]
[    0.072003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.072003] bus: 00 index 2 [mem 0x40000000-0xf3ffffff]
[    0.072003] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[    0.072003] ACPI: bus type pci registered
[    0.072003] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.072003] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.072003] PCI: Using MMCONFIG for extended config space
[    0.072003] PCI: Using configuration type 1 for base access
[    0.072081] bio: create slab <bio-0> at 0
[    0.072178] ACPI: Added _OSI(Module Device)
[    0.072180] ACPI: Added _OSI(Processor Device)
[    0.072183] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072185] ACPI: Added _OSI(Processor Aggregator Device)
[    0.073425] ACPI: EC: Look up EC in DSDT
[    0.077011] ACPI: Interpreter enabled
[    0.077019] ACPI: (supports S0 S1 S4 S5)
[    0.077039] ACPI: Using IOAPIC for interrupt routing
[    0.082989] ACPI: No dock devices found.
[    0.082993] HEST: Table not found.
[    0.082997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.083876] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[    0.085307] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[    0.085310] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[    0.085312] pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff]
[    0.085315] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[    0.085318] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c80]
[    0.085321] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff]
[    0.085324] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.085327] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xefffffff]
[    0.085330] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff]
[    0.085360] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
[    0.085538] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
[    0.085552] pci 0000:00:01.0: reg 18: [io  0x1d00-0x1dff]
[    0.085584] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[    0.085595] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
[    0.085611] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.085617] pci 0000:00:01.1: reg 24: [io  0xf400-0xf43f]
[    0.085647] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.085653] pci 0000:00:01.1: PME# disabled
[    0.085666] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[    0.085709] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[    0.085719] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[    0.085754] pci 0000:00:02.0: supports D1 D2
[    0.085756] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085760] pci 0000:00:02.0: PME# disabled
[    0.085773] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[    0.085783] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[    0.085826] pci 0000:00:02.1: supports D1 D2
[    0.085828] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085832] pci 0000:00:02.1: PME# disabled
[    0.085851] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[    0.085895] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[    0.085906] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
[    0.085951] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.085954] pci 0000:00:05.0: PME# disabled
[    0.085973] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[    0.085996] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.086029] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[    0.086040] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.086045] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
[    0.086081] pci 0000:00:07.0: supports D1 D2
[    0.086083] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.086087] pci 0000:00:07.0: PME# disabled
[    0.086101] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[    0.086111] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[    0.086116] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.086121] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[    0.086125] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[    0.086130] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
[    0.086135] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.086167] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[    0.086176] pci 0000:00:08.1: reg 10: [io  0x09e0-0x09e7]
[    0.086181] pci 0000:00:08.1: reg 14: [io  0x0be0-0x0be3]
[    0.086186] pci 0000:00:08.1: reg 18: [io  0x0960-0x0967]
[    0.086191] pci 0000:00:08.1: reg 1c: [io  0x0b60-0x0b63]
[    0.086196] pci 0000:00:08.1: reg 20: [io  0xc400-0xc40f]
[    0.086201] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
[    0.086241] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[    0.086272] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.086275] pci 0000:00:09.0: PME# disabled
[    0.086293] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[    0.086322] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.086325] pci 0000:00:0b.0: PME# disabled
[    0.086340] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[    0.086369] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.086371] pci 0000:00:0c.0: PME# disabled
[    0.086384] pci 0000:00:0d.0: [10de:03d0] type 0 class 0x000300
[    0.086392] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[    0.086398] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.086405] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.086412] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.086441] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.086462] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.086480] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.086496] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.086562] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.086566] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.086569] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.086573] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.086576] pci 0000:00:04.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.086579] pci 0000:00:04.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.086582] pci 0000:00:04.0:   bridge window [io  0x8000-0xffff] (subtractive decode)
[    0.086585] pci 0000:00:04.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.086588] pci 0000:00:04.0:   bridge window [io  0x1c00-0x1c80] (subtractive decode)
[    0.086590] pci 0000:00:04.0:   bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
[    0.086593] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.086596] pci 0000:00:04.0:   bridge window [mem 0x40000000-0xefffffff] (subtractive decode)
[    0.086599] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
[    0.086622] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.086628] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.086631] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.086636] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.086658] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.086662] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.086665] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.086669] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.086691] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.086695] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.086698] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.086702] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.086711] pci_bus 0000:00: on NUMA node 0
[    0.086714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.086848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.087027]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.087185]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[    0.087187] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.106906] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.106951] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.106996] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107040] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107084] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107127] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107172] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107216] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107262] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[    0.107306] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107352] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[    0.107398] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[    0.107443] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.107487] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107533] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[    0.107578] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[    0.107636] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.107682] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.107732] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[    0.107815] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.107888] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.107961] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.108042] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.108121] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.108193] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.108266] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.108339] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.108412] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0
[    0.108486] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.108559] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.108632] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[    0.108706] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
[    0.108779] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[    0.108853] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.108926] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.109000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.109075] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[    0.109148] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
[    0.109290] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.109295] vgaarb: loaded
[    0.109296] vgaarb: bridge control possible 0000:00:0d.0
[    0.109450] i2c-core: driver [aat2870] using legacy suspend method
[    0.109451] i2c-core: driver [aat2870] using legacy resume method
[    0.109563] SCSI subsystem initialized
[    0.109640] libata version 3.00 loaded.
[    0.109698] usbcore: registered new interface driver usbfs
[    0.109712] usbcore: registered new interface driver hub
[    0.109741] usbcore: registered new device driver usb
[    0.109852] PCI: Using ACPI for IRQ routing
[    0.111362] PCI: pci_cache_line_size set to 64 bytes
[    0.111377] pci 0000:00:01.0: no compatible bridge window for [io  0x1d00-0x1dff]
[    0.111424] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.111427] reserve RAM buffer: 0000000037ef0000 - 0000000037ffffff
[    0.111557] NetLabel: Initializing
[    0.111559] NetLabel:  domain hash size = 128
[    0.111561] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.111574] NetLabel:  unlabeled traffic allowed by default
[    0.111628] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.111635] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.111640] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.116060] Switching to clocksource hpet
[    0.125404] AppArmor: AppArmor Filesystem Enabled
[    0.125453] pnp: PnP ACPI init
[    0.125476] ACPI: bus type pnp registered
[    0.126220] pnp 00:00: [bus 00-04]
[    0.126223] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.126226] pnp 00:00: [io  0x0000-0x03af window]
[    0.126229] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.126231] pnp 00:00: [io  0x8000-0xffff window]
[    0.126234] pnp 00:00: [io  0x03b0-0x03df window]
[    0.126236] pnp 00:00: [io  0x1c00-0x1c80 window]
[    0.126239] pnp 00:00: [mem 0xfec80000-0xfecbffff window]
[    0.126241] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.126244] pnp 00:00: [mem 0x40000000-0xefffffff window]
[    0.126247] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[    0.126249] pnp 00:00: [mem 0x00000000 window]
[    0.126325] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.126387] pnp 00:01: [io  0x1000-0x107f]
[    0.126390] pnp 00:01: [io  0x1080-0x10ff]
[    0.126396] pnp 00:01: [io  0x1400-0x147f]
[    0.126398] pnp 00:01: [io  0x1480-0x14ff]
[    0.126400] pnp 00:01: [io  0x1800-0x187f]
[    0.126402] pnp 00:01: [io  0x1880-0x18ff]
[    0.126405] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[    0.126407] pnp 00:01: [io  0x2000-0x207f]
[    0.126409] pnp 00:01: [io  0x2080-0x20ff]
[    0.126478] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.126481] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.126484] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.126487] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.126490] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.126493] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.126496] system 00:01: [io  0x2000-0x207f] has been reserved
[    0.126499] system 00:01: [io  0x2080-0x20ff] has been reserved
[    0.126502] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126550] pnp 00:02: [io  0x0010-0x001f]
[    0.126552] pnp 00:02: [io  0x0022-0x003f]
[    0.126554] pnp 00:02: [io  0x0044-0x005f]
[    0.126557] pnp 00:02: [io  0x0062-0x0063]
[    0.126559] pnp 00:02: [io  0x0065-0x006f]
[    0.126561] pnp 00:02: [io  0x0074-0x007f]
[    0.126563] pnp 00:02: [io  0x0091-0x0093]
[    0.126565] pnp 00:02: [io  0x00a2-0x00bf]
[    0.126567] pnp 00:02: [io  0x00e0-0x00ef]
[    0.126570] pnp 00:02: [io  0x04d0-0x04d1]
[    0.126572] pnp 00:02: [io  0x0800-0x087f]
[    0.126574] pnp 00:02: [io  0x0290-0x029f]
[    0.126576] pnp 00:02: [io  0x0290-0x0297]
[    0.126582] pnp 00:02: disabling [io  0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126586] pnp 00:02: disabling [io  0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126589] pnp 00:02: disabling [io  0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126593] pnp 00:02: disabling [io  0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126597] pnp 00:02: disabling [io  0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126601] pnp 00:02: disabling [io  0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126604] pnp 00:02: disabling [io  0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126608] pnp 00:02: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126612] pnp 00:02: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io  0x0000-0x00ff]
[    0.126666] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.126669] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.126672] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.126675] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.126679] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126691] pnp 00:03: [dma 4]
[    0.126693] pnp 00:03: [io  0x0000-0x000f]
[    0.126695] pnp 00:03: [io  0x0080-0x0090]
[    0.126698] pnp 00:03: [io  0x0094-0x009f]
[    0.126700] pnp 00:03: [io  0x00c0-0x00df]
[    0.126735] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.126784] pnp 00:04: [irq 0 disabled]
[    0.126803] pnp 00:04: [irq 8]
[    0.126805] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[    0.126842] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.126870] pnp 00:05: [io  0x0070-0x0073]
[    0.126904] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.126913] pnp 00:06: [io  0x0061]
[    0.126949] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.126958] pnp 00:07: [io  0x00f0-0x00ff]
[    0.126968] pnp 00:07: [irq 13]
[    0.127001] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.127161] pnp 00:08: [io  0x03f0-0x03f5]
[    0.127164] pnp 00:08: [io  0x03f7]
[    0.127172] pnp 00:08: [irq 6]
[    0.127175] pnp 00:08: [dma 2]
[    0.127219] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.127433] pnp 00:09: [io  0x03f8-0x03ff]
[    0.127442] pnp 00:09: [irq 4]
[    0.127507] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.127735] pnp 00:0a: [io  0x0378-0x037f]
[    0.127744] pnp 00:0a: [irq 7]
[    0.127794] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.128488] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[    0.128554] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.128558] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128630] pnp 00:0c: [mem 0x000f0000-0x000fffff]
[    0.128633] pnp 00:0c: [mem 0xfeff0000-0xfeff00ff]
[    0.128635] pnp 00:0c: [mem 0x37ef0000-0x37efffff]
[    0.128638] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[    0.128640] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.128646] pnp 00:0c: [mem 0x00100000-0x37eeffff]
[    0.128648] pnp 00:0c: [mem 0x38000000-0x3fffffff]
[    0.128650] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.128653] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[    0.128655] pnp 00:0c: [mem 0xfefff000-0xfeffffff]
[    0.128658] pnp 00:0c: [mem 0xfff80000-0xfff80fff]
[    0.128660] pnp 00:0c: [mem 0xfff90000-0xfffbffff]
[    0.128662] pnp 00:0c: [mem 0xfffed000-0xfffeffff]
[    0.128734] system 00:0c: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.128738] system 00:0c: [mem 0xfeff0000-0xfeff00ff] has been reserved
[    0.128741] system 00:0c: [mem 0x37ef0000-0x37efffff] could not be reserved
[    0.128744] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[    0.128747] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.128750] system 00:0c: [mem 0x00100000-0x37eeffff] could not be reserved
[    0.128754] system 00:0c: [mem 0x38000000-0x3fffffff] has been reserved
[    0.128757] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.128760] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.128763] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.128766] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.128770] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.128773] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.128776] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.128787] pnp: PnP ACPI: found 13 devices
[    0.128789] ACPI: ACPI bus type pnp unregistered
[    0.128793] PnPBIOS: Disabled by ACPI PNP
[    0.165377] PCI: max bus depth: 1 pci_try_num: 2
[    0.165401] pci 0000:00:0d.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
[    0.165406] pci 0000:00:01.0: BAR 2: assigned [io  0xc000-0xc0ff]
[    0.165411] pci 0000:00:01.0: BAR 2: set to [io  0xc000-0xc0ff] (PCI address [0xc000-0xc0ff])
[    0.165414] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.165418] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.165422] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.165426] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.165430] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.165433] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.165436] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.165441] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.165446] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.165449] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.165452] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.165455] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.165460] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.165462] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.165466] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.165469] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.165480] pci 0000:00:04.0: setting latency timer to 64
[    0.165485] pci 0000:00:09.0: setting latency timer to 64
[    0.165490] pci 0000:00:0b.0: setting latency timer to 64
[    0.165494] pci 0000:00:0c.0: setting latency timer to 64
[    0.165498] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.165500] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.165503] pci_bus 0000:00: resource 6 [io  0x8000-0xffff]
[    0.165506] pci_bus 0000:00: resource 7 [io  0x03b0-0x03df]
[    0.165508] pci_bus 0000:00: resource 8 [io  0x1c00-0x1c80]
[    0.165511] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff]
[    0.165514] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[    0.165516] pci_bus 0000:00: resource 11 [mem 0x40000000-0xefffffff]
[    0.165519] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff]
[    0.165522] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.165525] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[    0.165527] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.165530] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
[    0.165533] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
[    0.165535] pci_bus 0000:01: resource 6 [io  0x8000-0xffff]
[    0.165538] pci_bus 0000:01: resource 7 [io  0x03b0-0x03df]
[    0.165540] pci_bus 0000:01: resource 8 [io  0x1c00-0x1c80]
[    0.165543] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff]
[    0.165546] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff]
[    0.165549] pci_bus 0000:01: resource 11 [mem 0x40000000-0xefffffff]
[    0.165551] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff]
[    0.165554] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.165557] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.165560] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.165563] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.165565] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.165568] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.165571] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
[    0.165574] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.165577] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.165632] NET: Registered protocol family 2
[    0.165711] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.166022] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.166954] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.167436] TCP: Hash tables configured (established 131072 bind 65536)
[    0.167439] TCP reno registered
[    0.167442] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.167457] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.167577] NET: Registered protocol family 1
[    0.167848] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    0.167873] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[    0.236026] pci 0000:00:02.0: PCI INT A disabled
[    0.236167] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.236180] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    0.236192] pci 0000:00:02.1: PCI INT B disabled
[    0.236237] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236288] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236349] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236408] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236467] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236532] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236601] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236674] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.236681] pci 0000:00:0d.0: Boot video device
[    0.236690] PCI: CLS 64 bytes, default 64
[    0.237131] audit: initializing netlink socket (disabled)
[    0.237143] type=2000 audit(1348615525.232:1): initialized
[    0.260030] Trying to unpack rootfs image as initramfs...
[    0.288695] highmem bounce pool size: 64 pages
[    0.288703] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.294535] VFS: Disk quotas dquot_6.5.2
[    0.294613] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.300153] fuse init (API version 7.17)
[    0.300296] msgmni has been set to 1693
[    0.312487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.312543] io scheduler noop registered
[    0.312545] io scheduler deadline registered
[    0.312558] io scheduler cfq registered (default)
[    0.312712] pcieport 0000:00:09.0: setting latency timer to 64
[    0.312744] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.312793] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.312814] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.312856] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.312875] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.312944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.312976] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.313149] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.313156] ACPI: Power Button [PWRB]
[    0.313222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.313225] ACPI: Power Button [PWRF]
[    0.313288] ACPI: Fan [FAN] (on)
[    0.315298] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[    0.315305] ACPI: [Package] has zero elements (f51c9de0)
[    0.315307] ACPI: Invalid passive threshold
[    0.315494] thermal LNXTHERM:00: registered as thermal_zone0
[    0.315497] ACPI: Thermal Zone [THRM] (40 C)
[    0.315540] ERST: Table is not found!
[    0.315541] GHES: HEST is not enabled!
[    0.315686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.336088] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.336115] isapnp: Scanning for PnP cards...
[    0.429074] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.448506] Linux agpgart interface v0.103
[    0.453309] brd: module loaded
[    0.454166] loop: module loaded
[    0.454469] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.454724] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.454747] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.454763] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.454770] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.454923] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    0.454927] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    0.454941] pata_acpi 0000:00:08.1: setting latency timer to 64
[    0.454948] pata_acpi 0000:00:08.1: PCI INT B disabled
[    0.455423] Fixed MDIO Bus: probed
[    0.455449] tun: Universal TUN/TAP device driver, 1.6
[    0.455451] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.460202] PPP generic driver version 2.4.2
[    0.460352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.460392] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    0.460417] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.460420] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.460465] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.460496] ehci_hcd 0000:00:02.1: debug port 1
[    0.460504] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.460532] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[    0.503954] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.580253] hub 1-0:1.0: USB hub found
[    0.580260] hub 1-0:1.0: 10 ports detected
[    0.580368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.580399] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[    0.580425] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.580428] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.580478] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.580519] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[    0.656286] hub 2-0:1.0: USB hub found
[    0.656296] hub 2-0:1.0: 10 ports detected
[    0.656403] uhci_hcd: USB Universal Host Controller Interface driver
[    0.656481] usbcore: registered new interface driver libusual
[    0.656545] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.689585] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.689588] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    0.971757] isapnp: No Plug & Play device found
[    0.971881] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.984255] mousedev: PS/2 mouse device common for all mice
[    0.984435] rtc_cmos 00:05: RTC can wake from S4
[    0.984583] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.984629] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.984743] device-mapper: uevent: version 1.0.3
[    0.984826] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.984874] EISA: Probing bus 0 at eisa.0
[    0.984878] EISA: Cannot allocate resource for mainboard
[    0.984881] Cannot allocate resource for EISA slot 1
[    0.984883] Cannot allocate resource for EISA slot 2
[    0.984898] Cannot allocate resource for EISA slot 8
[    0.984900] EISA: Detected 0 cards.
[    0.984915] cpufreq-nforce2: No nForce2 chipset.
[    0.984918] cpuidle: using governor ladder
[    0.984920] cpuidle: using governor menu
[    0.984922] EFI Variables Facility v0.08 2004-May-17
[    0.985162] TCP cubic registered
[    0.985318] NET: Registered protocol family 10
[    0.985904] NET: Registered protocol family 17
[    0.985909] Registering the dns_resolver key type
[    0.985934] Using IPI No-Shortcut mode
[    0.986044] PM: Hibernation image not present or could not be loaded.
[    0.986059] registered taskstats version 1
[    1.080198] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[    1.187614] Freeing initrd memory: 19920k freed
[    1.211637]   Magic number: 12:712:454
[    1.211770] rtc_cmos 00:05: setting system clock to 2012-09-25 23:25:27 UTC (1348615527)
[    1.211775] powernow-k8: Found 1 AMD Sempron(tm) Processor LE-1250 (1 cpu cores) (version 2.20.00)
[    1.211819] powernow-k8: fid 0xe (2200 MHz), vid 0xc
[    1.211821] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[    1.211823] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[    1.211825] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    1.211886] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.211888] EDD information not available.
[    1.212072] Freeing unused kernel memory: 712k freed
[    1.212613] Write protecting the kernel text: 5620k
[    1.212649] Write protecting the kernel read-only data: 2324k
[    1.234824] udevd[82]: starting version 175
[    1.366869] Floppy drive(s): fd0 is 1.44M
[    1.396778] pata_amd 0000:00:06.0: version 0.4.1
[    1.396832] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.409814] FDC 0 is a post-1991 82077
[    1.412616] scsi0 : pata_amd
[    1.416095] scsi1 : pata_amd
[    1.416640] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.416644] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.416802] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.416975] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.416995] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[    1.417001] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.528023] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[    1.580292] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66
[    1.580302] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[    1.580306] ata1.00: limited to UDMA/33 due to 40-wire cable
[    1.596216] ata1.00: configured for UDMA/33
[    1.597218] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S222A  SB02 PQ: 0 ANSI: 5
[    1.599496] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.599499] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.599635] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.599701] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.599776] ata2: port disabled--ignoring
[    1.768249] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[    1.768423] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input0
[    1.779348] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[    1.779543] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input1
[    1.806931] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.2/input/input4
[    1.807360] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input2
[    1.807522] usbcore: registered new interface driver usbhid
[    1.807525] usbhid: USB HID core driver
[    1.940922] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:e0:4d:a2:fa:d3
[    1.940928] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.941179] sata_nv 0000:00:08.0: version 3.5
[    1.941196] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.941251] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.942395] scsi2 : sata_nv
[    1.942537] scsi3 : sata_nv
[    1.942690] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.942693] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.942720] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    1.942771] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.943185] scsi4 : sata_nv
[    1.943302] scsi5 : sata_nv
[    1.943428] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[    1.943431] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[    2.408043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.408182] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.416222] ata5.00: ATAPI: Optiarc DVD RW AD-5200S, 1.09, max UDMA/100
[    2.416333] ata3.00: ATAPI: Optiarc DVD RW AD-7240S, 1.01, max UDMA/100
[    2.432114] ata3.00: configured for UDMA/100
[    2.432266] ata5.00: configured for UDMA/100
[    2.434071] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7240S  1.01 PQ: 0 ANSI: 5
[    2.436278] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.436424] sr 2:0:0:0: Attached scsi CD-ROM sr1
[    2.436553] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.904037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.953118] ata4.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    2.953122] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.019758] ata4.00: configured for UDMA/133
[    3.019868] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[    3.020086] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.020133] sd 3:0:0:0: [sda] Write Protect is off
[    3.020136] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.020156] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.020453] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.022171] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200S  1.09 PQ: 0 ANSI: 5
[    3.024537] sr2: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    3.024673] sr 4:0:0:0: Attached scsi CD-ROM sr2
[    3.024803] sr 4:0:0:0: Attached scsi generic sg3 type 5
[    3.077406]  sda: sda1 sda2 < sda5 sda6 >
[    3.077771] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.346288] ata6: SATA link down (SStatus 0 SControl 300)
[    4.378870] vesafb: mode is 2048x1536x32, linelength=8192, pages=0
[    4.378874] vesafb: scrolling: redraw
[    4.378878] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.380329] vesafb: framebuffer at 0xe0000000, mapped to 0xf8100000, using 12288k, total 12288k
[    4.382409] Console: switching to colour frame buffer device 256x96
[    4.382493] fb0: VESA VGA frame buffer device
[   11.873820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.358858] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.588743] udevd[378]: starting version 175
[   19.647786] lp: driver loaded but no devices found
[   19.745970] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   19.747855] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[   19.887950] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.246240] Disabling lock debugging due to kernel taint
[   20.317019] parport_pc 00:0a: reported by Plug and Play ACPI
[   20.317065] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   20.398172] ndiswrapper version 1.57 loaded (smp=yes, preempt=no)
[   20.399674] type=1400 audit(1348608346.683:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
[   20.400244] type=1400 audit(1348608346.687:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
[   20.400522] type=1400 audit(1348608346.687:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
[   20.465552] lp0: using parport0 (interrupt-driven).
[   20.544909] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   20.600753] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   20.656278] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   20.656288] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   20.656293] hda_intel: Disabling MSI
[   20.656322] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   20.668203] usb 1-3: reset high-speed USB device number 3 using ehci_hcd
[   20.920616] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded
[   21.708853] ppdev: user-space parallel port driver
[   21.802684] Bluetooth: Core ver 2.16
[   21.806590] NET: Registered protocol family 31
[   21.806596] Bluetooth: HCI device and connection manager initialized
[   21.806600] Bluetooth: HCI socket layer initialized
[   21.806603] Bluetooth: L2CAP socket layer initialized
[   21.806618] Bluetooth: SCO socket layer initialized
[   21.832128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.832134] Bluetooth: BNEP filters: protocol multicast
[   21.847618] init: failsafe main process (770) killed by TERM signal
[   21.886553] Bluetooth: RFCOMM TTY layer initialized
[   21.886562] Bluetooth: RFCOMM socket layer initialized
[   21.886564] Bluetooth: RFCOMM ver 1.11
[   21.989905] wlan0: ethernet device 30:46:9a:25:99:6b using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf
[   21.992965] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2-PSK; AES/CCMP with WPA, WPA2, WPA2-PSK
[   21.993964] usbcore: registered new interface driver ndiswrapper
[   22.209791] type=1400 audit(1348608348.495:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=884 comm="apparmor_parser"
[   22.212803] type=1400 audit(1348608348.499:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=884 comm="apparmor_parser"
[   22.376450] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.376792] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.390836] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   22.391030] forcedeth 0000:00:07.0: eth0: no link during initialization
[   22.410551] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.417488] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.472787] type=1400 audit(1348608348.759:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=932 comm="apparmor_parser"
[   22.480099] type=1400 audit(1348608348.767:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=935 comm="apparmor_parser"
[   22.486239] type=1400 audit(1348608348.771:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser"
[   22.489882] type=1400 audit(1348608348.775:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser"
[   22.506257] type=1400 audit(1348608348.791:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=936 comm="apparmor_parser"
[   22.733384] init: alsa-restore main process (977) terminated with status 19
[   22.852291] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   22.852532] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   22.852714] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   22.852894] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   22.853072] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   22.853992] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[   22.853999] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 21 (level, low) -> IRQ 21
[   22.854006] nvidia 0000:00:0d.0: setting latency timer to 64
[   22.854012] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   22.854349] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.35  Thu May 31 12:00:16 PDT 2012
[   22.865907] init: gdm main process (1020) killed by TERM signal
[   33.815620] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   43.880012] wlan0: no IPv6 routers present
[   46.124056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input10
[   54.267398] show_signal_msg: 30 callbacks suppressed
[   54.267404] accounts-daemon[1192]: segfault at 21 ip 005f07c3 sp bfea1f40 error 4 in libdbus-1.so.3.5.8[5cb000+47000]
[   70.996029] usb 2-1: new low-speed USB device number 3 using ohci_hcd
[   71.220237] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input11
[   71.220368] generic-usb 0003:1C4F:0003.0004: input,hidraw3: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-1/input0
[   98.792079] wlan0: no IPv6 routers present
[  841.143329] UDP: short packet: From 208.93.223.162:63360 25649/66 to 192.168.0.101:51413
[  866.291511] UDP: short packet: From 208.93.223.162:63360 25649/66 to 192.168.0.101:51413
[  883.017173] UDP: short packet: From 208.93.223.162:63360 25649/66 to 192.168.0.101:51413

lsusb
Kod:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231]
Bus 002 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 003: ID 1c4f:0003 SiGma Micro HID controller

Ne znam šta da radim. I dalje čekam.
U međuvremenu googlam, ali ne tako uspešno Sad

Help! Rotfl
25.09.2012. 22.44
Pronađi sve korisnikove poruke Zahvali Citiraj ovu poruku u odgovoru
[+]
djetvan Nije na vezi
Inventar foruma
*****

Poruka: 1,272
Dao zahvalnica: 48
Dobio zahvalnica: 118 u 88 poruka
Pridružen: Aug 2008
Ugled: 4
Poruka: #2
RE: Microsoft Wireless Desktop 800
Verovatno treba namestiti U BIOS-u.
U opciji za periferije omogućiti sve stavke za usb tastaturu, pa će proraditi i wireless miš!
26.09.2012. 06.50
Pronađi sve korisnikove poruke Zahvali Citiraj ovu poruku u odgovoru
[+]
dvajedan Nije na vezi
Banovan

Poruka: 1,168
Dao zahvalnica: 23
Dobio zahvalnica: 143 u 142 poruka
Pridružen: Oct 2011
Poruka: #3
RE: Microsoft Wireless Desktop 800
Kao prepoznat je:

Kod:
[    1.768249] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[    1.768423] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input0
[    1.779348] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[    1.779543] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input1
[    1.806931] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.2/input/input4
[    1.807360] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on

Kod:
Bus 002 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth

Bluetooth veza

https://help.ubuntu.com/community/BluetoothSetup

Ili je možda samo pomešao inputeHuh

Kod:
[   71.220237] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input11
[   71.220368] generic-usb 0003:1C4F:0003.0004: input,hidraw3: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-1/input0
(Poslednja izmena: 14.04.2013. 13.42 od zika.)
26.09.2012. 07.49
Poseti veb stranicu korisnika Pronađi sve korisnikove poruke Zahvali Citiraj ovu poruku u odgovoru
[+]
AleXboY Nije na vezi
Član
***

Poruka: 55
Dao zahvalnica: 7
Dobio zahvalnica: 7 u 6 poruka
Pridružen: Feb 2012
Ugled: 0
Poruka: #4
RE: Microsoft Wireless Desktop 800
BUMP

Ima li mi pomoći?

Za sada samo hvata prašinu ova moja plastika.
29.09.2012. 13.01
Pronađi sve korisnikove poruke Zahvali Citiraj ovu poruku u odgovoru
[+]
AleXboY Nije na vezi
Član
***

Poruka: 55
Dao zahvalnica: 7
Dobio zahvalnica: 7 u 6 poruka
Pridružen: Feb 2012
Ugled: 0
Poruka: #5
RE: Microsoft Wireless Desktop 800
BUMP

UPDATE: Sada Xubuntu 12.10

Kod:
dmesg|tail
Kod:
alex@alex-N61PB-M2S:~$ dmesg|tail
[  197.939501] EXT4-fs (sda6): Unaligned AIO/DIO on inode 9961755 by VirtualBox; performance will be poor.
[  562.670884] device eth0 left promiscuous mode
[  563.044086] usb 2-3: reset full-speed USB device number 2 using ohci_hcd
[  563.280284] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input15
[  563.280728] hid-generic 0003:045E:0745.0007: input,hiddev0,hidraw0: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input2
[  563.293772] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input16
[  563.294473] hid-generic 0003:045E:0745.0008: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input1
[  563.304304] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input17
[  563.304858] hid-generic 0003:045E:0745.0009: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input0
[  565.563814] vboxnetflt: dropped 0 out of 2246 packets

Kod:
lsusb
Kod:
alex@alex-N61PB-M2S:~$ lsusb
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1241:1603 Belkin Keyboard
Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter

Evo ga:
Kod:
Bus 002 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth

i
Citat:dmesg | grep microsoft
Kod:
alex@alex-N61PB-M2S:~$ dmesg | grep Microsoft
[    1.631046] usb 2-3: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0
[    1.631048] usb 2-3: Manufacturer: Microsoft
[    1.829776] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[    1.829890] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input0
[    1.831273] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3
[    1.831409] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input1
[    1.850230] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input4
[    1.850366] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input2
[  563.280284] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input15
[  563.280728] hid-generic 0003:045E:0745.0007: input,hiddev0,hidraw0: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input2
[  563.293772] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input16
[  563.294473] hid-generic 0003:045E:0745.0008: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input1
[  563.304304] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input17
[  563.304858] hid-generic 0003:045E:0745.0009: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-3/input0

Ne rade ni tastatura ni miš.
Kada uđem u Mouse and Touchpad, prikaže mi Microsoft 2.4GHz Transceiver v8.0

Što mi je činiti?
14.04.2013. 12.07
Pronađi sve korisnikove poruke Zahvali Citiraj ovu poruku u odgovoru
[+]
« Starije Teme | Novije Teme »
Odgovori 


  • Verzija Za Štampu
  • Pošalji ovu Temu Prijatelju
  • Prati ovu temu


Kontakt Ubuntu LoZa Srbije Povratak na Vrh Povratak na Sadržaj Mobile Version RSS Prijava greške
© 2005-2018 Ubuntu LoCo Serbia. Ubuntu and Canonical are registered trademarks of Canonical Ltd.
Powered_by MyBB, © 2002-2018 MyBB Group.
Designed by : ZeRQ and Ubuntu LoCo Serbia
Hosted by mCloud